లెవల్1/master te.po

Specific information regarding this po file may be available in the discussion tab (every page has a set of tabs like article, discussion, edit etc. on top). Check that page before you start editing. General information about po files and help in editing these files can be found here.
#
#
# Debian Installer master translation file template
# Don't forget to properly fill-in the header of PO files 
#
# Debian Installer translators, please read the D-I i18n documentation
# in doc/i18n/i18n.txt
#
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: debian-installer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2006-12-03 07:41+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: text
#. Description
#: ../main-menu.templates:3
msgid "Debian installer main menu"
msgstr ""

#. Type: select
#. Description
#: ../main-menu.templates:9
msgid "Choose the next step in the install process:"
msgstr ""

#. Type: select
#. Description
#: ../main-menu.templates:9
msgid "This is the main menu for the Debian installer."
msgstr ""

#. Type: error
#. Description
#: ../main-menu.templates:14
msgid "Installation step failed"
msgstr ""

#. Type: error
#. Description
#: ../main-menu.templates:14
msgid ""
"An installation step failed. You can try to run the failing item again from "
"the menu, or skip it and choose something else. The failing step is: ${ITEM}"
msgstr ""

#. Type: select
#. Description
#: ../main-menu.templates:23
msgid "Choose an installation step:"
msgstr ""

#. Type: select
#. Description
#: ../main-menu.templates:23
msgid ""
"This installation step depends on one or more other steps that have not yet "
"been performed."
msgstr ""

#. Type: note
#. Description
#: ../di-utils-shell.templates:3
msgid "Interactive shell"
msgstr ""

#. Type: note
#. Description
#: ../di-utils-shell.templates:3
msgid "After this message, you will be running \"ash\", a Bourne-shell clone."
msgstr ""

#. Type: note
#. Description
#: ../di-utils-shell.templates:3
msgid ""
"The root file system is a RAM disk. The hard disk file systems are mounted "
"on \"/target\". The editor available to you is nano. It's very small and "
"easy to figure out. To get an idea of what Unix utilities are available to "
"you, use the \"help\" command."
msgstr ""

#. Type: note
#. Description
#: ../di-utils-shell.templates:3
msgid "Use the \"exit\" command to return to the installation menu."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. The translation should not exceed 55 columns except for languages
#. that are only supported in the graphical version of the installer
#: ../di-utils-shell.templates:18
msgid "Execute a shell"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. The translation should not exceed 55 columns except for languages
#. that are only supported in the graphical version of the installer
#: ../di-utils-exit-installer.templates:6
msgid "Exit installer demo"
msgstr ""

#. Type: boolean
#. Description
#: ../di-utils-reboot.templates:4
msgid "Are you sure you want to exit now?"
msgstr ""

#. Type: boolean
#. Description
#: ../di-utils-reboot.templates:4
msgid ""
"If you have not finished the install, your system may be left in an unusable "
"state."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. The translation should not exceed 55 columns except for languages
#. that are only supported in the graphical version of the installer
#: ../di-utils-reboot.templates:13
msgid "Abort the installation"
msgstr ""

#. Type: text
#. Description
#. base-installer progress bar item
#: ../di-utils.templates:4
msgid "Registering modules..."
msgstr ""

#. Type: multiselect
#. Description
#: ../anna.templates:4
msgid ""
"All components of the installer needed to complete the install will be "
"loaded automatically and are not listed here. Some other (optional) "
"installer components are shown below. They are probably not necessary, but "
"may be interesting to some users."
msgstr ""

#. Type: multiselect
#. Description
#: ../anna.templates:16
msgid "Installer components to load:"
msgstr ""

#. Type: multiselect
#. Description
#: ../anna.templates:16
msgid ""
"To save memory, only components that are certainly needed for an install are "
"selected by default. The other installer components are not all necessary "
"for a basic install, but you may need some of them, especially certain "
"kernel modules, so look through the list carefully and select the components "
"you need."
msgstr ""

#. Type: multiselect
#. Description
#: ../anna.templates:16
msgid ""
"Note that if you select a component that requires others, those components "
"will also be loaded."
msgstr ""

#. Type: text
#. Description
#. (Progress bar) title displayed when loading udebs
#. TRANSLATORS : keep short
#: ../anna.templates:30
msgid "Loading additional components"
msgstr ""

#. Type: text
#. Description
#. (Progress bar)
#. TRANSLATORS : keep short
#: ../anna.templates:36
msgid "Retrieving ${PACKAGE}"
msgstr ""

#. Type: error
#. Description
#: ../anna.templates:40
msgid "Failed to load installer component"
msgstr ""

#. Type: error
#. Description
#: ../anna.templates:40
msgid "Loading ${PACKAGE} failed for unknown reasons. Aborting."
msgstr ""

#. Type: boolean
#. Description
#: ../anna.templates:46
msgid "Continue the install without loading kernel modules?"
msgstr ""

#. Type: boolean
#. Description
#: ../anna.templates:46
msgid ""
"No kernel modules were found. This probably is due to a mismatch between the "
"kernel used by this version of the installer and the kernel version "
"available in the archive."
msgstr ""

#. Type: boolean
#. Description
#: ../anna.templates:46
msgid ""
"If you're installing from a mirror, you can work around this problem by "
"choosing to install a different version of Debian. The install will probably "
"fail to work if you continue without kernel modules."
msgstr ""

#. Type: text
#. Description
#. This menu entry may be translated.
#. However, translators are required to keep "Choose language"
#. as an alternative separated by the "/" character
#. Example (french): Choisir la langue/Choose language
#: ../localechooser.templates-in:7
msgid "Choose language"
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../localechooser.templates-in:75
msgid "Storing language..."
msgstr ""

#. Type: select
#. Default
#. Translators: put here the ISO-3166 ENGLISH NAME of the country which should be selected as default for your language
#. DO NOT TRANSLATE "[ default country ]", it is here only for technical purpose
#. Example (german):
#. msgid "United States[ default country ]"
#. msgstr "Germany"
#. "Deutschland" would be WRONG
#. "Deutschland[ default country ]" ALSO
#: ../localechooser.templates-in:88
msgid "United States[ default country ]"
msgstr ""

#. Type: select
#. Choices
#. "other", here, is added to the list of countries that will be displayed
#. for users to choose among them
#. For instance, choosing "Italian" will show:
#. Italy, Switzerland, other
#: ../localechooser.templates-in:112
msgid "other"
msgstr ""

#. Type: select
#. Default
#. Translators: put here the ISO-3166 CODE of the country which should be selected as default for your language
#. Example (german): DE
#. (country code for Germany)
#: ../localechooser.templates-in:116
msgid "US"
msgstr ""

#. Type: select
#. Description
#: ../localechooser.templates-in:117
msgid "Choose a country, territory or area:"
msgstr ""

#. Type: select
#. Description
#: ../localechooser.templates-in:117
msgid ""
"Based on your language, you are probably located in one of these countries "
"or regions."
msgstr ""

#. Type: select
#. Description
#: ../localechooser.templates-in:124
msgid "Choose a locale:"
msgstr ""

#. Type: select
#. Description
#: ../localechooser.templates-in:124
msgid ""
"Based on your language and country choices, the following locale parameters "
"are supported."
msgstr ""

#. Type: multiselect
#. Description
#: ../localechooser.templates-in:144
msgid "Choose other locales to be supported:"
msgstr ""

#. Type: multiselect
#. Description
#: ../localechooser.templates-in:144
msgid "You may choose additional locales to be installed from this list."
msgstr ""

#: ../../countrylist:14
msgid "-- North America --"
msgstr ""

#: ../../countrylist:15
msgid "-- Central America --"
msgstr ""

#: ../../countrylist:16
msgid "-- South America --"
msgstr ""

#: ../../countrylist:17
msgid "-- Caribbean --"
msgstr ""

#: ../../countrylist:18
msgid "-- Europe --"
msgstr ""

#: ../../countrylist:19
msgid "-- Asia --"
msgstr ""

#: ../../countrylist:20
msgid "-- Africa --"
msgstr ""

#: ../../countrylist:21
msgid "-- Indian Ocean --"
msgstr ""

#: ../../countrylist:22
msgid "-- Oceania --"
msgstr ""

#: ../../countrylist:23
msgid "-- Antarctica --"
msgstr ""

#: ../../countrylist:24
msgid "-- other --"
msgstr ""

#. Type: text
#. Description
#. Main menu item. Please keep below 55 columns
#: ../kbd-chooser.templates-in:4
msgid "Select a keyboard layout"
msgstr ""

#. Type: select
#. Description
#: ../kbd-chooser.templates-in:10
msgid "Type of keyboard:"
msgstr ""

#. Type: select
#. Description
#: ../kbd-chooser.templates-in:10
msgid "Please choose the type of keyboard to configure."
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../kbd-chooser.templates-in:30
msgid "No keyboard to configure"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../kbd-chooser.templates-in:35
msgid "Do not configure keyboard; keep kernel keymap"
msgstr ""

#. Type: text
#. Description
#. base-installer progress bar item
#: ../kbd-chooser.templates-in:40
msgid "Configuring keyboard ..."
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-at.templates:4
msgid "PC-style (AT or PS-2 connector) keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-atari.templates:4
msgid "Atari keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-amiga.templates:4
msgid "Amiga keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-acorn.templates:4
msgid "Acorn keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-mac.templates:4
msgid "Mac keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-sparc.templates:4
msgid "Sun keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-usb.templates:4
msgid "USB keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-dec.templates:4
msgid "DEC keyboard"
msgstr ""

#. Type: text
#. Description
#. Translators, this is a menu choice. MUST BE UNDER 65 COLUMNS
#: ../keyboard-hil.templates:4
msgid "HP HIL keyboard"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:4
msgid "Load CD-ROM drivers from a driver floppy?"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:4
msgid ""
"You may need to load additional CD-ROM drivers from a driver floppy. If you "
"have such a floppy available now, put it in the drive, and continue. "
"Otherwise, you will be given the option to manually select CD-ROM modules."
msgstr ""

#. Type: text
#. Description
#: ../cdrom-detect.templates:14
msgid "Detecting hardware to find CD-ROM drives"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:19
msgid "Manually select a CD-ROM module and device?"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:19
msgid "No common CD-ROM drive was detected."
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:19
msgid ""
"Your CD-ROM drive may be an old Mitsumi or another non-IDE, non-SCSI CD-ROM "
"drive. In that case you should choose which module to load and the device to "
"use. If you don't know which module and device are needed, look for some "
"documentation or try a network installation instead of a CD-ROM installation."
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:31
msgid "Try again to mount the CD-ROM?"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-detect.templates:31
msgid ""
"Your installation CD-ROM couldn't be mounted. This probably means that the "
"CD-ROM was not in the drive. If so you can insert it and try again."
msgstr ""

#. Type: select
#. Description
#: ../cdrom-detect.templates:39
msgid "Module needed for accessing the CD-ROM:"
msgstr ""

#. Type: select
#. Description
#: ../cdrom-detect.templates:39
msgid ""
"The automatic detection didn't find a CD-ROM drive. You can try to load a "
"specific module if you have a unusual CD-ROM drive (that is neither IDE nor "
"SCSI)."
msgstr ""

#. Type: string
#. Description
#: ../cdrom-detect.templates:47
msgid "Device file for accessing the CD-ROM:"
msgstr ""

#. Type: string
#. Description
#: ../cdrom-detect.templates:47
msgid ""
"In order to access your CD-ROM drive, please enter the device file that "
"should be used. Non-standard CD-ROM drives use non-standard device files "
"(such as /dev/mcdx)."
msgstr ""

#. Type: string
#. Description
#: ../cdrom-detect.templates:47
msgid ""
"You may switch to the shell on the second terminal (ALT+F2) to check the "
"available devices in /dev with \"ls /dev\". You can return to this screen by "
"pressing ALT+F1."
msgstr ""

#. Type: text
#. Description
#: ../cdrom-detect.templates:58
msgid "Scanning CD-ROM"
msgstr ""

#. Type: text
#. Description
#: ../cdrom-detect.templates:62
msgid "Scanning ${DIR}..."
msgstr ""

#. Type: note
#. Description
#: ../cdrom-detect.templates:66
msgid "CD-ROM detected"
msgstr ""

#. Type: note
#. Description
#: ../cdrom-detect.templates:66
msgid ""
"The CD-ROM autodetection was successful. A CD-ROM drive has been found and "
"it currently contains the CD ${cdname}. The installation will now continue."
msgstr ""

#. Type: error
#. Description
#: ../cdrom-detect.templates:72
msgid "Incorrect CD-ROM detected"
msgstr ""

#. Type: error
#. Description
#: ../cdrom-detect.templates:72
msgid "The CD-ROM drive contains a CD which cannot be used for installation."
msgstr ""

#. Type: error
#. Description
#: ../cdrom-detect.templates:72
msgid "Please insert a suitable CD to continue with the installation."
msgstr ""

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#: ../cdrom-detect.templates:80
msgid "Error reading Release file"
msgstr ""

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#: ../cdrom-detect.templates:80
msgid ""
"The CD-ROM does not seem to contain a valid 'Release' file, or that file "
"could not be read correctly."
msgstr ""

#. Type: error
#. Description
#. Translators: DO NOT TRANSLATE "Release". This is the name of a file.
#: ../cdrom-detect.templates:80
msgid ""
"You may try to repeat CD-ROM detection but, even if it does succeed the "
"second time, you may experience problems later in the installation."
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../cdrom-detect.templates:107
msgid "Unmounting and ejecting CD-ROM..."
msgstr ""

#. Type: text
#. Description
#. Item in the main menu to select this package
#: ../cdrom-detect.templates:112
msgid "Detect and mount CD-ROM"
msgstr ""

#. Type: select
#. Choices
#: ../ethdetect.templates:6
msgid "no ethernet card"
msgstr ""

#. Type: select
#. Choices
#. "none of the above" should be understood as "none of the above choices"
#: ../ethdetect.templates:6 ../disk-detect.templates:15
msgid "none of the above"
msgstr ""

#. Type: select
#. Description
#: ../ethdetect.templates:8
msgid "Driver needed by your Ethernet card:"
msgstr ""

#. Type: select
#. Description
#: ../ethdetect.templates:8
msgid ""
"No Ethernet card was detected. If you know the name of the driver needed by "
"your Ethernet card, you can select it from the list."
msgstr ""

#. Type: boolean
#. Description
#: ../ethdetect.templates:15
msgid "Do you intend to use FireWire Ethernet?"
msgstr ""

#. Type: boolean
#. Description
#: ../ethdetect.templates:15
msgid ""
"No Ethernet card was detected, but a FireWire interface is present. It's "
"possible, though unlikely, that with the right FireWire hardware connected "
"to it, this could be your primary Ethernet interface."
msgstr ""

#. Type: error
#. Description
#: ../ethdetect.templates:22
msgid "Ethernet card not found"
msgstr ""

#. Type: error
#. Description
#: ../ethdetect.templates:22
msgid "No Ethernet card was found on the system."
msgstr ""

#. Type: text
#. Description
#: ../ethdetect.templates:27
msgid "Detecting network hardware"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../ethdetect.templates:32
msgid "Detect network hardware"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../disk-detect.templates:4
msgid "Detect disks"
msgstr ""

#. Type: text
#. Description
#: ../disk-detect.templates:8
msgid "Detecting disks and all other hardware"
msgstr ""

#. Type: select
#. Choices
#: ../disk-detect.templates:15
msgid "continue with no disk drive"
msgstr ""

#. Type: select
#. Description
#: ../disk-detect.templates:17
msgid "Driver needed for your disk drive:"
msgstr ""

#. Type: select
#. Description
#: ../disk-detect.templates:17
msgid ""
"No disk drive was detected. If you know the name of the driver needed by "
"your disk drive, you can select it from the list."
msgstr ""

#. Type: error
#. Description
#: ../disk-detect.templates:23
msgid "No partitionable media"
msgstr ""

#. Type: error
#. Description
#: ../disk-detect.templates:23
msgid "No partitionable media were found."
msgstr ""

#. Type: error
#. Description
#: ../disk-detect.templates:23
msgid "Please check that a hard disk is attached to this machine."
msgstr ""

#. Type: text
#. Description
#: ../hw-detect.templates:3
msgid "Detecting hardware, please wait..."
msgstr ""

#. Type: text
#. Description
#: ../hw-detect.templates:7
msgid "Loading module '${MODULE}' for '${CARDNAME}'..."
msgstr ""

#. Type: text
#. Description
#: ../hw-detect.templates:11
msgid "Starting PC card services..."
msgstr ""

#. Type: multiselect
#. Description
#: ../hw-detect.templates:16
msgid "Modules to load:"
msgstr ""

#. Type: multiselect
#. Description
#: ../hw-detect.templates:16
msgid ""
"The following Linux kernel modules were detected as matching your hardware. "
"If you know some are unnecessary, or cause problems, you can choose not to "
"load them. If you're unsure, you should leave them all selected."
msgstr ""

#. Type: boolean
#. Description
#: ../hw-detect.templates:25
msgid "Start PC card services?"
msgstr ""

#. Type: boolean
#. Description
#: ../hw-detect.templates:25
msgid ""
"Please choose whether PC card services should be started in order to allow "
"the use of PCMCIA cards."
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:31
msgid "PCMCIA resource range options:"
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:31
msgid ""
"Some PCMCIA hardware needs special resource configuration options in order "
"to work, and can cause the computer to freeze otherwise. For example, some "
"Dell laptops need \"exclude port 0x800-0x8ff\" to be specified here. These "
"options will be added to /etc/pcmcia/config.opts. See the installation "
"manual or the PCMCIA HOWTO for more information."
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:31
msgid "For most hardware, you do not need to specify anything here."
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:42
msgid "Additional parameters for module ${MODULE}:"
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:42
msgid ""
"The module ${MODULE} failed to load. You may need to pass parameters to the "
"module to make it work; this is common with older hardware. These parameters "
"are often I/O port and IRQ numbers that vary from machine to machine and "
"cannot be determined from the hardware. An example string looks something "
"like \"irq=7 io=0x220\""
msgstr ""

#. Type: string
#. Description
#: ../hw-detect.templates:42
msgid ""
"If you don't know what to enter, consult your documentation, or leave it "
"blank to not load the module."
msgstr ""

#. Type: error
#. Description
#: ../hw-detect.templates:54
msgid "Error while running '${CMD_LINE_PARAM}'"
msgstr ""

#. Type: boolean
#. Description
#: ../hw-detect.templates:59
msgid "Load missing drivers from a driver floppy?"
msgstr ""

#. Type: boolean
#. Description
#: ../hw-detect.templates:59
msgid ""
"A driver for your hardware is not available. You may need to load drivers "
"from a driver floppy. If you have such a floppy available now, put it in the "
"drive before continuing."
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-common.templates:4
msgid "Auto-configure network with DHCP?"
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-common.templates:4
msgid ""
"Networking can either be configured by DHCP or by manually entering all the "
"information. If you choose to use DHCP and the installer is unable to get a "
"working configuration from a DHCP server on your network, you will be given "
"the opportunity to configure your network manually after the attempt to "
"configure it by DHCP."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:14
msgid "Domain name:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:14
msgid ""
"The domain name is the part of your Internet address to the right of your "
"host name.  It is often something that ends in .com, .net, .edu, or .org.  "
"If you are setting up a home network, you can make something up, but make "
"sure you use the same domain name on all your computers."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:22
msgid "Name server addresses:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:22
msgid ""
"The name servers are used to look up host names on the network. Please enter "
"the IP addresses (not host names) of up to 3 name servers, separated by "
"spaces. Do not use commas. The first name server in the list will be the "
"first to be queried. If you don't want to use any name server, just leave "
"this field blank."
msgstr ""

#. Type: select
#. Description
#: ../netcfg-common.templates:32
msgid "Primary network interface:"
msgstr ""

#. Type: select
#. Description
#: ../netcfg-common.templates:32
msgid ""
"Your system has multiple network interfaces. Choose the one to use as the "
"primary network interface during the installation. If possible, the first "
"connected network interface found has been selected."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:39
msgid ""
"${iface} is a wireless network interface. Please enter the name (the ESSID) "
"of the wireless network you would like ${iface} to use. If you would like to "
"use any available network, leave this field blank."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:46
msgid "Wireless ESSID for ${iface}:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:46
msgid "Attempting to find an available wireless network failed."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:46
msgid ""
"${iface} is a wireless network interface. Please enter the name (the ESSID) "
"of the wireless network you would like ${iface} to use. To skip wireless "
"configuration and continue, leave this field blank."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:55
msgid "WEP key for wireless device ${iface}:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:55
msgid ""
"If applicable, please enter the WEP security key for the wireless device "
"${iface}. There are two ways to do this:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:55
msgid ""
"If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', "
"or 'nnnnnnnn', where n is a number, just enter it as it is into this field."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:55
msgid ""
"If your WEP key is in the format of a passphrase, prefix it with "
"'s:' (without quotes)."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:55
msgid ""
"Of course, if there is no WEP key for your wireless network, leave this "
"field blank."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:70
msgid "Invalid WEP key"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:70
msgid ""
"The WEP key '${wepkey}' is invalid. Please refer to the instructions on the "
"next screen carefully on how to enter your WEP key correctly, and try again."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:77
msgid "Invalid ESSID"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:77
msgid ""
"The ESSID \"${essid}\" is invalid. ESSIDs may only be up to 32 characters, "
"but may contain all kinds of characters."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:84
msgid "Hostname:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:84
msgid "Please enter the hostname for this system."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-common.templates:84
msgid ""
"The hostname is a single word that identifies your system to the network. If "
"you don't know what your hostname should be, consult your network "
"administrator. If you are setting up your own home network, you can make "
"something up here."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:94
msgid "Invalid hostname"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:94
msgid "The name \"${hostname}\" is invalid."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:94
msgid ""
"A valid hostname may contain only the numbers 0-9, the lowercase letters a-"
"z, and the minus sign. It must be between 2 and 63 characters long, and may "
"not begin or end with a minus sign."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:103
msgid "Error"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:103
msgid ""
"An error occurred and the network configuration process has been aborted. "
"You may retry it from the installation main menu."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:109
msgid "No network interfaces detected"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:109
msgid ""
"No network interfaces were found. The installation system was unable to find "
"a network device."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-common.templates:109
msgid ""
"You may need to load a specific module for your network card, if you have "
"one. For this, go back to the network hardware detection step."
msgstr ""

#. Type: note
#. Description
#. A "kill switch" is a physical switch found on some network cards that
#. disables the card.
#: ../netcfg-common.templates:120
msgid "Kill switch enabled on ${iface}"
msgstr ""

#. Type: note
#. Description
#. A "kill switch" is a physical switch found on some network cards that
#. disables the card.
#: ../netcfg-common.templates:120
msgid ""
"${iface} appears to have been disabled by means of a physical \"kill switch"
"\". If you intend to use this interface, please switch it on before "
"continuing."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. below the 65 columns limit (which means 65 characters for most languages)
#. Choices MUST be separated by commas
#. You MUST use standard commas not special commas for your language
#. You MUST NOT use commas inside choices
#: ../netcfg-common.templates:133
msgid "Infrastructure (Managed) network"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. below the 65 columns limit (which means 65 characters for most languages)
#. Choices MUST be separated by commas
#. You MUST use standard commas not special commas for your language
#. You MUST NOT use commas inside choices
#: ../netcfg-common.templates:133
msgid "Ad-hoc network (Peer to peer)"
msgstr ""

#. Type: select
#. Description
#: ../netcfg-common.templates:134
msgid "Type of wireless network:"
msgstr ""

#. Type: select
#. Description
#: ../netcfg-common.templates:134
msgid ""
"Wireless networks are either managed or ad-hoc. If you use a real access "
"point of some sort, your network is Managed. If another computer is your "
"'access point', then your network may be Ad-hoc."
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:141
msgid "Wireless network configuration"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:145
msgid "Searching for wireless access points ..."
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:155
msgid "<none>"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:159
msgid "Wireless ethernet (802.11x)"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:163
msgid "wireless"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:167
msgid "Ethernet or Fast Ethernet"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:171
msgid "Token Ring"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:175
msgid "USB net"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:184
msgid "Serial-line IP"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:188
msgid "Parallel-port IP"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:192
msgid "Point-to-Point Protocol"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:196
msgid "IPv6-in-IPv4"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:200
msgid "ISDN Point-to-Point Protocol"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:204
msgid "Channel-to-channel"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:208
msgid "Real channel-to-channel"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:217
msgid "Inter-user communication vehicle"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-common.templates:221
msgid "Unknown interface"
msgstr ""

#. Type: text
#. Description
#. base-installer progress bar item
#: ../netcfg-common.templates:226
msgid "Storing network settings ..."
msgstr ""

#. Type: text
#. Description
#. Item in the main menu to select this package
#: ../netcfg-common.templates:231
msgid "Configure the network"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-dhcp.templates:3
msgid "DHCP hostname:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-dhcp.templates:3
msgid ""
"You may need to supply a DHCP host name. If you are using a cable modem, you "
"might need to specify an account number here."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-dhcp.templates:3
msgid "Most other users can just leave this blank."
msgstr ""

#. Type: text
#. Description
#: ../netcfg-dhcp.templates:11
msgid "Configuring the network with DHCP"
msgstr ""

#. Type: text
#. Description
#: ../netcfg-dhcp.templates:15
msgid "This may take some time."
msgstr ""

#. Type: text
#. Description
#: ../netcfg-dhcp.templates:19
msgid "Network autoconfiguration has succeeded"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-dhcp.templates:23
msgid "No DHCP client found"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-dhcp.templates:23
msgid "No DHCP client was found. This package requires pump or dhcp-client."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-dhcp.templates:23
msgid "The DHCP configuration process will be aborted."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translation
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../netcfg-dhcp.templates:34
msgid "Retry network autoconfiguration"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translation
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../netcfg-dhcp.templates:34
msgid "Retry network autoconfiguration with a DHCP hostname"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translation
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../netcfg-dhcp.templates:34
msgid "Configure network manually"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translation
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../netcfg-dhcp.templates:34
msgid "Do not configure the network at this time"
msgstr ""

#. Type: select
#. Description
#: ../netcfg-dhcp.templates:36
msgid "Network configuration method:"
msgstr ""

#. Type: select
#. Description
#: ../netcfg-dhcp.templates:36
msgid ""
"From here you can choose to retry DHCP network autoconfiguration (which may "
"succeed if your DHCP server takes a long time to respond) or to configure "
"the network manually. Some DHCP servers require a DHCP hostname to be sent "
"by the client, so you can also choose to retry DHCP network "
"autoconfiguration with a hostname that you provide."
msgstr ""

#. Type: note
#. Description
#: ../netcfg-dhcp.templates:46
msgid "Network autoconfiguration failed"
msgstr ""

#. Type: note
#. Description
#: ../netcfg-dhcp.templates:46
msgid ""
"Your network is probably not using the DHCP protocol. Alternatively, the "
"DHCP server may be slow or some network hardware is not working properly."
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-dhcp.templates:52
msgid "Continue without a default route?"
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-dhcp.templates:52
msgid ""
"The network autoconfiguration was successful. However, no default route was "
"set: the system does not know how to communicate with hosts on the Internet. "
"This will make it impossible to continue with the installation unless you "
"have the first installation CD-ROM, a 'Netinst' CD-ROM, or packages "
"available on the local network."
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-dhcp.templates:52
msgid ""
"If you are unsure, you should not continue without a default route: contact "
"your local network administrator about this problem."
msgstr ""

#. Type: text
#. Description
#: ../netcfg-dhcp.templates:64
msgid "Reconfigure the wireless network"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:3
msgid "IP address:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:3
msgid ""
"The IP address is unique to your computer and consists of four numbers "
"separated by periods.  If you don't know what to use here, consult your "
"network administrator."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-static.templates:10
msgid "Malformed IP address"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-static.templates:10
msgid ""
"The IP address you provided is malformed. It should be in the form x.x.x.x "
"where each 'x' is no larger than 255. Please try again."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:16
msgid "Point-to-point address:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:16
msgid ""
"The point-to-point address is used to determine the other endpoint of the "
"point to point network.  Consult your network administrator if you do not "
"know the value.  The point-to-point address should be entered as four "
"numbers separated by periods."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:25
msgid "Netmask:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:25
msgid ""
"The netmask is used to determine which machines are local to your network.  "
"Consult your network administrator if you do not know the value.  The "
"netmask should be entered as four numbers separated by periods."
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:33
msgid "Gateway:"
msgstr ""

#. Type: string
#. Description
#: ../netcfg-static.templates:33
msgid ""
"The gateway is an IP address (four numbers separated by periods) that "
"indicates the gateway router, also known as the default router.  All traffic "
"that goes outside your LAN (for instance, to the Internet) is sent through "
"this router.  In rare circumstances, you may have no router; in that case, "
"you can leave this blank.  If you don't know the proper answer to this "
"question, consult your network administrator."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-static.templates:44
msgid "Unreachable gateway"
msgstr ""

#. Type: error
#. Description
#: ../netcfg-static.templates:44
msgid "The gateway address you entered is unreachable."
msgstr ""

#. Type: error
#. Description
#: ../netcfg-static.templates:44
msgid ""
"You may have made an error entering your IP address, netmask and/or gateway."
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-static.templates:53
msgid "Is this information correct?"
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-static.templates:53
msgid "Currently configured network parameters:"
msgstr ""

#. Type: boolean
#. Description
#: ../netcfg-static.templates:53
msgid ""
" interface     = ${interface}\n"
" ipaddress     = ${ipaddress}\n"
" netmask       = ${netmask}\n"
" gateway       = ${gateway}\n"
" pointopoint   = ${pointopoint}\n"
" nameservers   = ${nameservers}"
msgstr ""

#. Type: text
#. Description
#. Item in the main menu to select this package
#: ../netcfg-static.templates:66
msgid "Configure a network using static addressing"
msgstr ""

#. Type: select
#. Choices
#: ../choose-mirror-bin.templates-in:13
msgid "stable"
msgstr ""

#. Type: select
#. Choices
#: ../choose-mirror-bin.templates-in:13
msgid "testing"
msgstr ""

#. Type: select
#. Choices
#: ../choose-mirror-bin.templates-in:13
msgid "unstable"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates-in:14
msgid "Debian version to install:"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates-in:14
msgid ""
"Debian comes in several flavors. Stable is well-tested and rarely changes. "
"Unstable is untested and frequently changing. Testing is a middle ground, "
"that receives many of the new versions from unstable if they are not too "
"buggy."
msgstr ""

#. Type: text
#. Description
#: ../choose-mirror-bin.templates-in:26
msgid "Checking the Debian archive mirror"
msgstr ""

#. Type: text
#. Description
#: ../choose-mirror-bin.templates-in:30
msgid "Downloading the Release file..."
msgstr ""

#. Type: error
#. Description
#: ../choose-mirror-bin.templates-in:34
msgid "Bad archive mirror"
msgstr ""

#. Type: error
#. Description
#: ../choose-mirror-bin.templates-in:34
msgid ""
"The specified Debian archive mirror is either not available, or does not "
"have a valid Release file on it. Please try a different mirror."
msgstr ""

#. Type: error
#. Description
#: ../choose-mirror-bin.templates-in:40
msgid "Architecture not supported"
msgstr ""

#. Type: error
#. Description
#: ../choose-mirror-bin.templates-in:40
msgid ""
"The specified Debian archive mirror does not seem to support your "
"architecture. Please try a different mirror."
msgstr ""

#. Type: text
#. Description
#. main-menu
#: ../choose-mirror-bin.templates-in:47
msgid "Choose a mirror of the Debian archive"
msgstr ""

#. Type: select
#. Choices
#: ../choose-mirror-bin.templates.http-in:5
#: ../choose-mirror-bin.templates.ftp-in:5
msgid "enter information manually"
msgstr ""

#. Type: select
#. Default
#. Translators, you should put here the ISO 3166 code of a country
#. which you know hosts at least one Debian HTTP mirror. Please check
#. that the country really has a Debian HTTP mirror before putting a
#. random value here
#.
#. First check that the country you mention here is listed in
#. http://cvs.debian.org/ *checkout* /webwml/english/mirror/Mirrors.masterlist?rev=HEAD\&cvsroot=webwml&content-type=text/plain
#. (remove the spaces between "*" and "/")
#.
#. BE CAREFUL to use the TWO LETTER ISO-3166 CODE and not anything else
#.
#. You do not need to translate what's between the square brackets
#. You should even NOT put square brackets in translations:
#. msgid "US[ Default value for http]"
#. msgstr "FR"
#: ../choose-mirror-bin.templates.http-in:21
msgid "US[ Default value for http]"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.http-in:22
#: ../choose-mirror-bin.templates.ftp-in:22
msgid "Debian archive mirror country:"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.http-in:22
#: ../choose-mirror-bin.templates.ftp-in:22
msgid ""
"The goal is to find a mirror of the Debian archive that is close to you on "
"the network -- be aware that nearby countries, or even your own, may not be "
"the best choice."
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.http-in:30
#: ../choose-mirror-bin.templates.ftp-in:30
msgid "Debian archive mirror:"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.http-in:30
#: ../choose-mirror-bin.templates.ftp-in:30
msgid ""
"Please select a Debian archive mirror. You should use a mirror in your "
"country or region if you do not know which mirror has the best Internet "
"connection to you."
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.http-in:30
#: ../choose-mirror-bin.templates.ftp-in:30
msgid "Usually, ftp.<your country code>.debian.org is a good choice."
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:39
#: ../choose-mirror-bin.templates.ftp-in:39
msgid "Debian archive mirror hostname:"
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:39
#: ../choose-mirror-bin.templates.ftp-in:39
msgid ""
"Please enter the hostname of the mirror from which Debian will be downloaded."
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:39
#: ../choose-mirror-bin.templates.ftp-in:39
msgid ""
"An alternate port can be specified using the standard [hostname]:[port] "
"format."
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:48
#: ../choose-mirror-bin.templates.ftp-in:48
msgid "Debian archive mirror directory:"
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:48
#: ../choose-mirror-bin.templates.ftp-in:48
msgid ""
"Please enter the directory in which the mirror of the Debian archive is "
"located."
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:54
msgid "HTTP proxy information (blank for none):"
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:54
msgid ""
"If you need to use a HTTP proxy to access the outside world, enter the proxy "
"information here. Otherwise, leave this blank."
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.http-in:54
#: ../choose-mirror-bin.templates.ftp-in:54
msgid ""
"The proxy information should be given in the standard form of \"http://"
"[[user][:pass]@]host[:port]/\"."
msgstr ""

#. Type: select
#. Default
#. Translators, you should put here the ISO 3166 code of a country
#. which you know hosts at least one Debian FTP mirror. Please check
#. that the country really has a Debian FTP mirror before putting a
#. random value here
#.
#. First check that the country you mention here is listed in
#. http://cvs.debian.org/ *checkout* /webwml/english/mirror/Mirrors.masterlist?rev=HEAD\&cvsroot=webwml&content-type=text/plain
#. (remove the spaces between "*" and "/")
#.
#. BE CAREFUL to use the TWO LETTER ISO-3166 CODE and not anything else
#.
#. You do not need to translate what's between the square brackets
#. You should even NOT put square brackets in translations:
#. msgid "US[ Default value for ftp]"
#. msgstr "FR"
#: ../choose-mirror-bin.templates.ftp-in:21
msgid "US[ Default value for ftp]"
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.ftp-in:54
msgid "FTP proxy information (blank for none):"
msgstr ""

#. Type: string
#. Description
#: ../choose-mirror-bin.templates.ftp-in:54
msgid ""
"If you need to use a FTP proxy to access the outside world, enter the proxy "
"information here. Otherwise, leave this blank."
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.both-in:7
msgid "Protocol for file downloads:"
msgstr ""

#. Type: select
#. Description
#: ../choose-mirror-bin.templates.both-in:7
msgid ""
"Please select the protocol to be used for downloading files. If unsure, "
"select \"http\"; it is less prone to problems involving firewalls."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../download-installer.templates:4
msgid "Download installer components"
msgstr ""

#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../net-retriever.templates:5 ../apt-mirror-setup.templates:32
msgid "Retry"
msgstr ""

#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../net-retriever.templates:5 ../apt-mirror-setup.templates:32
msgid "Change mirror"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#: ../net-retriever.templates:5 ../mountfloppy.templates:4
#: ../cdebconf-newt-udeb.templates:24 ../mdcfg-utils.templates:123
msgid "Cancel"
msgstr ""

#. Type: select
#. Description
#: ../net-retriever.templates:7 ../apt-mirror-setup.templates:33
msgid "Downloading a file failed:"
msgstr ""

#. Type: select
#. Description
#: ../net-retriever.templates:7
msgid ""
"The installer failed to download a file from the mirror. This may be a "
"problem with your network, or with the mirror. You can choose to retry the "
"download, select a different mirror, or cancel and choose another "
"installation method."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../load-cdrom.templates:4
msgid "Load installer components from CD"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-retriever.templates:4
msgid "Failed to copy file from CD-ROM. Retry?"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-retriever.templates:4
msgid ""
"There was a problem reading data from the CD-ROM. Please make sure it is in "
"the drive. If retrying does not work, you should check the integrity of your "
"CD-ROM."
msgstr ""

#. Type: text
#. Description
#: ../floppy-retriever.templates:3
msgid "Scanning the floppy"
msgstr ""

#. Type: text
#. Description
#: ../floppy-retriever.templates:7
msgid "Cannot read floppy, or not a driver floppy."
msgstr ""

#. Type: text
#. Description
#: ../floppy-retriever.templates:7
msgid ""
"There was a problem reading data from the floppy disk. Please make sure that "
"the right floppy is in the drive. If you continue to have trouble, you may "
"have a bad floppy disk."
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:4
msgid "Load drivers from floppy now?"
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:4
msgid ""
"You probably need to load drivers from a floppy before continuing with the "
"installation. If you know that the install will work without extra drivers, "
"you can skip this step."
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:4
msgid ""
"If you do need to load drivers, insert the appropriate driver floppy before "
"continuing."
msgstr ""

#. Type: text
#. Description
#. main-menu
#: ../load-floppy.templates:15
msgid "Load drivers from a floppy"
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:20
msgid "Unknown floppy. Try to load anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:20
msgid ""
"The floppy is not a known driver floppy. Please make sure that the correct "
"floppy is in the drive. You can still continue if you have an unofficial "
"floppy you want to use."
msgstr ""

#. Type: text
#. Description
#: ../load-floppy.templates:27
msgid "Please insert ${DISK_LABEL} ('${DISK_NAME}') first."
msgstr ""

#. Type: text
#. Description
#: ../load-floppy.templates:27
msgid ""
"Due to dependencies between packages, driver floppies must be loaded in the "
"correct order."
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:34
msgid "Load drivers from another floppy?"
msgstr ""

#. Type: boolean
#. Description
#: ../load-floppy.templates:34
msgid ""
"To load additional drivers from another floppy, please insert the "
"appropriate driver floppy before continuing."
msgstr ""

#. Type: select
#. Description
#: ../mountfloppy.templates:5
msgid "Select your floppy device:"
msgstr ""

#. Type: select
#. Description
#: ../mountfloppy.templates:5
msgid ""
"No standard floppy drive was found. If you have a USB floppy drive or some "
"other unusual type of floppy drive, select it from the list. Note that the "
"list may also include devices that are not floppy drives."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:3
msgid "Starting up the partitioner"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:11
msgid "Scanning disks..."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:15
msgid "Detecting file systems..."
msgstr ""

#. Type: error
#. Description
#: ../partman-base.templates:20
msgid "Device in use"
msgstr ""

#. Type: error
#. Description
#: ../partman-base.templates:20
msgid ""
"No modifications can be made to the device ${DEVICE} for the following "
"reasons:"
msgstr ""

#. Type: error
#. Description
#: ../partman-base.templates:33
msgid "Partition in use"
msgstr ""

#. Type: error
#. Description
#. This should be translated as "partition *number* ${PARTITION}"
#. In short, ${PARTITION} will indeed contain the partition
#. NUMBER and not the partition NAME
#: ../partman-base.templates:33
msgid ""
"No modifications can be made to the partition #${PARTITION} of device "
"${DEVICE} for the following reasons:"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:53
msgid ""
"This partitioner doesn't have information about the default type of the "
"partition tables on your architecture.  Please send an e-mail message to "
"debian-boot@lists.debian.org with information."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:53
msgid ""
"Please note that if the type of the partition table is unsupported by "
"libparted, then this partitioner will not work properly."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:64
msgid "Continue with partitioning?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:64
msgid ""
"This partitioner is based on the library libparted which doesn't have "
"support for the partition tables used on your architecture.  It is strongly "
"recommended that you exit this partitioner."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:64
msgid ""
"If you can, please help to add support for your partition table type to "
"libparted."
msgstr ""

#. Type: select
#. Description
#: ../partman-base.templates:75
msgid ""
"This is an overview of your currently configured partitions and mount "
"points. Select a partition to modify its settings (file system, mount point, "
"etc.), a free space to create partitions, or a device to initialise its "
"partition table."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:80
msgid "Create new empty partition table on this device?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:80
msgid ""
"You have selected an entire device to partition. If you proceed with "
"creating a new partition table on the device, then all current partitions "
"will be removed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:80
msgid "Note that you will be able to undo this operation later if you wish."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:90
msgid "Write a new empty partition table?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:90
msgid ""
"Because of limitations in the current implementation of the Sun partition "
"tables in libparted, the newly created partition table has to be written to "
"the disk immediately."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:90
msgid ""
"You will NOT be able to undo this operation later and all existing data on "
"the disk will be irreversibly removed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:90
msgid ""
"Confirm whether you actually want to create a new partition table and write "
"it to disk."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:104
msgid "Continue with the installation?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:104
msgid ""
"No partition table changes and no creation of file systems have been planned."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:104
msgid ""
"If you plan on using already created file systems, be aware that existing "
"files may prevent the successful installation of the base system."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:114
msgid "Write the changes to disks?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:114
msgid ""
"If you continue, the changes listed below will be written to the disks. "
"Otherwise, you will be able to make further changes manually."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-base.templates:114
msgid ""
"WARNING: This will destroy all data on any partitions you have removed as "
"well as on the partitions that are going to be formatted."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:125
msgid "The following partitions are going to be formatted:"
msgstr ""

#. Type: text
#. Description
#. for example: "partition #6 of IDE0 master as ext3 journaling file system"
#: ../partman-base.templates:130
msgid "partition #${PARTITION} of ${DEVICE} as ${TYPE}"
msgstr ""

#. Type: text
#. Description
#. for devices which have no partitions
#. for example: "LVM VG Debian, LV Root as ext3 journaling file system"
#: ../partman-base.templates:136
msgid "${DEVICE} as ${TYPE}"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:140
msgid "The partition tables of the following devices are changed:"
msgstr ""

#. Type: select
#. Description
#: ../partman-base.templates:145
msgid "What to do with this device:"
msgstr ""

#. Type: select
#. Description
#: ../partman-base.templates:150
msgid "How to use this free space:"
msgstr ""

#. Type: select
#. Description
#: ../partman-base.templates:155
msgid "Partition settings:"
msgstr ""

#. Type: select
#. Description
#: ../partman-base.templates:155
msgid ""
"You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} "
"${DESTROYED}"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:160
msgid "This partition is formatted with the ${FILESYSTEM}."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:164
msgid "No existing file system was detected in this partition."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:168
msgid "All data in it WILL BE DESTROYED!"
msgstr ""

#. Type: note
#. Description
#: ../partman-base.templates:172
msgid "The partition starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr ""

#. Type: note
#. Description
#: ../partman-base.templates:176
msgid "The free space starts from ${FROMCHS} and ends at ${TOCHS}."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. progress bar item
#: ../partman-base.templates:180 ../partman-auto.templates:3
#: ../clock-setup.templates:22
msgid "Please wait..."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:184
msgid "Partitions formatting"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:188
msgid "Processing..."
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:200
msgid "Done setting up the partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:204
msgid "Finish partitioning and write changes to disk"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:208
msgid "Undo changes to partitions"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:212
msgid "Show Cylinder/Head/Sector information"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:216
#, no-c-format
msgid "Dump partition info in %s"
msgstr ""

#. Type: text
#. Description
#. Keep short
#: ../partman-base.templates:221
msgid "FREE SPACE"
msgstr ""

#. Type: text
#. Description
#. "unusable free space".  No more than 8 symbols.
#: ../partman-base.templates:226
msgid "unusable"
msgstr ""

#. Type: text
#. Description
#. "primary partition".  No more than 8 symbols.
#: ../partman-base.templates:231
msgid "primary"
msgstr ""

#. Type: text
#. Description
#. "logical partition".  No more than 8 symbols.
#: ../partman-base.templates:236
msgid "logical"
msgstr ""

#. Type: text
#. Description
#. "primary or logical".  No more than 8 symbols.
#: ../partman-base.templates:241
msgid "pri/log"
msgstr ""

#. Type: text
#. Description
#. How to print the partition numbers in your language
#. Examples:
#. %s.
#. No %s
#. N. %s
#: ../partman-base.templates:250
#, no-c-format
msgid "#%s"
msgstr ""

#. Type: text
#. Description
#. For example IDE0 master (hda)
#: ../partman-base.templates:255
#, no-c-format
msgid "IDE%s master (%s)"
msgstr ""

#. Type: text
#. Description
#. For example IDE1 slave (hdd)
#: ../partman-base.templates:260
#, no-c-format
msgid "IDE%s slave (%s)"
msgstr ""

#. Type: text
#. Description
#. For example IDE1 master, partition #5 (hdc5)
#: ../partman-base.templates:265
#, no-c-format
msgid "IDE%s master, partition #%s (%s)"
msgstr ""

#. Type: text
#. Description
#. For example IDE2 slave, partition #5 (hdf5)
#: ../partman-base.templates:270
#, no-c-format
msgid "IDE%s slave, partition #%s (%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:274
#, no-c-format
msgid "SCSI%s (%s,%s,%s) (%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:278
#, no-c-format
msgid "SCSI%s (%s,%s,%s), partition #%s (%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:282
#, no-c-format
msgid "RAID%s device #%s"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:286
#, no-c-format
msgid "Encrypted volume (%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:290
#, no-c-format
msgid "LVM VG %s, LV %s"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:294
#, no-c-format
msgid "Loopback (loop%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:298
#, no-c-format
msgid "DASD %s (%s)"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:302
#, no-c-format
msgid "DASD %s (%s), partition #%s"
msgstr ""

#. Type: text
#. Description
#: ../partman-base.templates:306
msgid "Cancel this menu"
msgstr ""

#. Type: text
#. Description
#. Main menu entry
#: ../partman-base.templates:311
msgid "Partition disks"
msgstr ""

#. Type: text
#. Description
#: ../partman-auto.templates:7
msgid "Computing the new partitions..."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:11
msgid ""
"This probably happened because the selected disk or free space is too small "
"to be automatically partitioned."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:17 ../partman-auto-lvm.templates:18
msgid "Failed to partition the selected disk"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:17
msgid ""
"This probably happened because there are too many (primary) partitions in "
"the partition table."
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:24
msgid ""
"The installer can guide you through partitioning a disk (using different "
"standard schemes) or, if you prefer, you can do it manually. With guided "
"partitioning you will still have a chance later to review and customise the "
"results."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto.templates:36
msgid "Remove existing logical volume data?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto.templates:36
msgid ""
"The selected device already contains logical volumes and/or volume groups "
"from a previous LVM installation, which must be removed from the disk before "
"creating any partitions."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto.templates:36
msgid ""
"Note that this will also permanently erase any data currently on the logical "
"volumes."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:46
msgid "LVM physical volume already exists on the selected device"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:46
msgid ""
"The selected device already contains one or more LVM physical volumes which "
"cannot be removed. It is therefore not possible to automatically partition "
"this device."
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:64
msgid "Partitioning method:"
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:64
msgid ""
"If you choose guided partitioning for an entire disk, you will next be asked "
"which disk should be used."
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:79
msgid "Partitioning scheme:"
msgstr ""

#. Type: select
#. Description
#. "Selected for partitioning" can be either an entire disk
#. of "the largest continuous free space" on an existing disk
#. TRANSLATORS, please take care to choose something appropriate for both
#.
#. It is followed by a variable giving the chosen disk, hence the colon
#. at the end of the sentence. Please keep it.
#: ../partman-auto.templates:79
msgid "Selected for partitioning:"
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:79
msgid ""
"The disk can be partitioned using one of several different schemes. If you "
"are unsure, choose the first one."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:89
msgid "Unusable free space"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto.templates:89
msgid ""
"Partitioning failed because the chosen free space may not be used. There are "
"probably too many (primary) partitions in the partition table."
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:108
msgid "Guided partitioning"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:113
msgid "Guided - use the largest continuous free space"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:118
msgid "Guided - use entire disk"
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:123
msgid "Select disk to partition:"
msgstr ""

#. Type: select
#. Description
#: ../partman-auto.templates:123
msgid ""
"Note that all data on the disk you select will be erased, but not before you "
"have confirmed that you really want to make the changes."
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-auto.templates:130
msgid "Select disk(s) to partition:"
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-auto.templates:130
msgid ""
"Note that all data on the disk(s) you select will be erased, but not before "
"you have confirmed that you really want to make the changes."
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#. This is a method for partioning - as in guided (automatic) versus manual
#: ../partman-auto.templates:138
msgid "Manual"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:143
msgid "Automatically partition the free space"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:148
msgid "All files in one partition (recommended for new users)"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:153
msgid "Separate /home partition"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:158
msgid "Separate /home, /usr, /var, and /tmp partitions"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto.templates:163
msgid "Small-disk (< 1GB) partitioning scheme"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicmethods.templates:3
msgid "Go back to the menu?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicmethods.templates:3
msgid "No file system is specified for partition #${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicmethods.templates:3
msgid ""
"If you do not go back to the partitioning menu and assign a file system to "
"this partition, it won't be used at all."
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:11
msgid "do not use the partition"
msgstr ""

#. Type: text
#. Description
#. up to 25 character positions
#: ../partman-basicmethods.templates:16
msgid "Format the partition:"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:20
msgid "yes, format it"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:24
msgid "no, keep existing data"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:28
msgid "do not use"
msgstr ""

#. Type: text
#. Description
#. short variant of `do not use the partition'
#: ../partman-basicmethods.templates:33
msgid "unused"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:37
msgid "format the partition"
msgstr ""

#. Type: text
#. Description
#. short variant of `format the partition'
#: ../partman-basicmethods.templates:42
msgid "format"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicmethods.templates:46
msgid "keep and use the existing data"
msgstr ""

#. Type: text
#. Description
#. short variant of `keep and use the existing data'
#: ../partman-basicmethods.templates:51
msgid "keep"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:3
msgid "Resizing partition..."
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:7
msgid "Copying partition..."
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:11
msgid "Computing the new state of the partition table..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:15
msgid ""
"Before you can select a partition to copy, any previous changes have to be "
"written to disk."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:15
msgid "Please note that the copy operation may take a long time."
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:26
msgid "Source partition:"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:26
msgid "Please choose the partition which contains the data you want to copy."
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:31
msgid "Copy operation failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:31
msgid "The copy operation is aborted."
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:38
msgid "The resize operation is impossible"
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:38
msgid "Because of an unknown reason it is impossible to resize this partition."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../partman-partitioning.templates:38 ../base-installer.templates:124
#: ../quik-installer.templates:131 ../yaboot-installer.templates:88
#: ../vmelilo-installer.templates:46 ../lvmcfg-utils.templates:24001
#: ../lvmcfg-utils.templates:32001 ../lvmcfg-utils.templates:37001
#: ../partman-lvm.templates:380 ../partman-auto-lvm.templates:40
#: ../partman-auto-raid.templates:3
msgid "Check /var/log/syslog or see virtual console 4 for the details."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:45
msgid "Write previous changes to disk and continue?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:45
msgid ""
"Before you can select a new partition size, any previous changes have to be "
"written to disk."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:45
msgid "You cannot undo this operation."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-partitioning.templates:45
msgid "Please note that the resize operation may take a long time."
msgstr ""

#. Type: string
#. Description
#: ../partman-partitioning.templates:56
msgid ""
"The minimum size you can use is ${MINSIZE} or ${PERCENT} and the maximum "
"size is ${MAXSIZE}."
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:70
msgid "Too large size"
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:74
msgid "Too small size"
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:78
msgid "Resize operation failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:78 ../partman-md.templates:36
msgid "An error occurred while writing the changes to the storage devices."
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:78
msgid "The resize operation is aborted."
msgstr ""

#. Type: string
#. Description
#: ../partman-partitioning.templates:86
msgid "New partition size:"
msgstr ""

#. Type: string
#. Description
#: ../partman-partitioning.templates:86
msgid "The maximum size you can use is ${MAXSIZE}."
msgstr ""

#. Type: string
#. Description
#: ../partman-partitioning.templates:86
#, no-c-format
msgid ""
"Hint: Use \"20%\" (or \"30%\", etc.) for 20% (resp. 30%, etc.) of the "
"available free space for this partition.  Use \"max\" as a shortcut for the "
"maximum allowed size."
msgstr ""

#. Type: error
#. Description
#: ../partman-partitioning.templates:95
msgid "Invalid size"
msgstr ""

#. Type: select
#. Choices
#: ../partman-partitioning.templates:99
msgid "Beginning"
msgstr ""

#. Type: select
#. Choices
#: ../partman-partitioning.templates:99
msgid "End"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:100
msgid "Location for the new partition:"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:100
msgid ""
"Please choose whether you want the new partition to be created at the "
"beginning or at the end of the available space."
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:107
msgid "File system for the new partition:"
msgstr ""

#. Type: select
#. Choices
#: ../partman-partitioning.templates:111
msgid "Primary"
msgstr ""

#. Type: select
#. Choices
#: ../partman-partitioning.templates:111
msgid "Logical"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:112
msgid "Type for the new partition:"
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-partitioning.templates:117
msgid "Flags for the new partition:"
msgstr ""

#. Type: string
#. Description
#: ../partman-partitioning.templates:121
msgid "Partition name:"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:126
msgid "Partition table type:"
msgstr ""

#. Type: select
#. Description
#: ../partman-partitioning.templates:126
msgid "Select the type of partition table to use."
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:131
msgid "Set the partition flags"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:135
msgid "Name:"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:139
msgid "Bootable flag:"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:143
msgid "on"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:147
msgid "off"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:151
msgid "Resize the partition (currently ${SIZE})"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:155
msgid "Copy data from another partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:159
msgid "Delete the partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:163
msgid "Create a new partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-partitioning.templates:167
msgid "Create a new empty partition table on this device"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:3
msgid ""
"Checking the ${TYPE} file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:7
msgid "Checking the swap space in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:11
msgid "Creating ${TYPE} file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:15
msgid ""
"Creating ${TYPE} file system for ${MOUNT_POINT} in partition #${PARTITION} "
"of ${DEVICE}..."
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:19
msgid "Formatting swap space in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:23
msgid ""
"The test of the file system with type ${TYPE} in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:32 ../partman-ext3.templates:7
#: ../partman-reiserfs.templates:7 ../partman-jfs.templates:7
#: ../partman-xfs.templates:7 ../partman-ext2r0.templates:7
msgid "Go back to the menu and correct errors?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:32
msgid ""
"The test of the swap space in partition #${PARTITION} of ${DEVICE} found "
"uncorrected errors."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:32
msgid ""
"If you do not go back to the partitioning menu and correct these errors, the "
"partition will be used as is."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:41
msgid ""
"You have not selected any partitions for use as swap space. Enabling swap "
"space is recommended so that the system can make better use of the available "
"physical memory, and so that it behaves better when physical memory is "
"scarce. You may experience installation problems if you do not have enough "
"physical memory."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:41
msgid ""
"If you do not go back to the partitioning menu and assign a swap partition, "
"the installation will continue without swap space."
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:53 ../partman-ext3.templates:16
#: ../partman-reiserfs.templates:16 ../partman-jfs.templates:16
#: ../partman-xfs.templates:16 ../partman-ext2r0.templates:16
msgid "Failed to create a file system"
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:53
msgid ""
"The ${TYPE} file system creation in partition #${PARTITION} of ${DEVICE} "
"failed."
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:59
msgid "Failed to create a swap space"
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:59
msgid ""
"The creation of swap space in partition #${PARTITION} of ${DEVICE} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:64 ../partman-ext3.templates:22
#: ../partman-reiserfs.templates:22 ../partman-jfs.templates:22
#: ../partman-xfs.templates:22 ../partman-ext2r0.templates:22
msgid "Do you want to return to the partitioning menu?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:64
msgid ""
"No mount point is assigned for ${FILESYSTEM} file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-basicfilesystems.templates:64 ../partman-ext3.templates:22
#: ../partman-reiserfs.templates:22 ../partman-jfs.templates:22
#: ../partman-xfs.templates:22 ../partman-ext2r0.templates:22
msgid ""
"If you do not go back to the partitioning menu and assign a mount point from "
"there, this partition will not be used at all."
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:73
msgid "Invalid file system for this mount point"
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:73
msgid ""
"The file system type ${FILESYSTEM} cannot be mounted on ${MOUNTPOINT}, "
"because it is not a fully-functional Unix file system. Please choose a "
"different file system, such as ${EXT2}."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/ - the root file system"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/boot - static files of the boot loader"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/home - user home directories"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/tmp - temporary files"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/usr - static data"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/var - variable data"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/srv - data for services provided by this system"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/opt - add-on application software packages"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:83
msgid "/usr/local - local hierarchy"
msgstr ""

#. Type: select
#. Choices
#: ../partman-basicfilesystems.templates:88
msgid "/dos"
msgstr ""

#. Type: select
#. Choices
#: ../partman-basicfilesystems.templates:88
msgid "/windows"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. what's to be entered is a mount point
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. What's to be "entered manually" is a mount point
#: ../partman-basicfilesystems.templates:88 ../partman-ext2r0.templates:36
#: ../partconf.templates:62
msgid "Enter manually"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. "it" is a partition
#: ../partman-basicfilesystems.templates:88 ../partman-ext2r0.templates:36
msgid "Do not mount it"
msgstr ""

#. Type: string
#. Description
#: ../partman-basicfilesystems.templates:93 ../partman-ext2r0.templates:41
msgid "Mount point for this partition:"
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:97 ../partman-ext2r0.templates:45
msgid "Invalid mount point"
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:97 ../partman-ext2r0.templates:45
msgid "The mount point you entered is invalid."
msgstr ""

#. Type: error
#. Description
#: ../partman-basicfilesystems.templates:97 ../partman-ext2r0.templates:45
msgid "Mount points must start with \"/\". They cannot contain spaces."
msgstr ""

#. Type: string
#. Description
#: ../partman-basicfilesystems.templates:104
msgid "Label for the file system in this partition:"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:108
msgid "Format the swap area:"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. In the following context: "Format the partition: yes"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:113 ../partman-crypto.templates:121
msgid "yes"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. In the following context: "Format the partition: no"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:118 ../partman-crypto.templates:117
msgid "no"
msgstr ""

#. Type: text
#. Description
#. label of file system
#: ../partman-basicfilesystems.templates:123
msgid "Label:"
msgstr ""

#. Type: text
#. Description
#. for partman-basicfilesystems: in the following context: "Label: none"
#: ../partman-basicfilesystems.templates:128
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Label:\" ]"
msgstr ""

#. Type: text
#. Description
#. Up to 24 character positions
#: ../partman-basicfilesystems.templates:133
msgid "Reserved blocks:"
msgstr ""

#. Type: string
#. Description
#: ../partman-basicfilesystems.templates:137
msgid "Percentage of the file system blocks reserved for the super-user:"
msgstr ""

#. Type: text
#. Description
#. Up to 25 character positions
#: ../partman-basicfilesystems.templates:142
msgid "Typical usage:"
msgstr ""

#. Type: text
#. Description
#. In the following context: "Typical usage: standard"
#: ../partman-basicfilesystems.templates:147
msgid "standard"
msgstr ""

#. Type: select
#. Description
#: ../partman-basicfilesystems.templates:155
msgid "Typical usage of this partition:"
msgstr ""

#. Type: select
#. Description
#: ../partman-basicfilesystems.templates:155
msgid ""
"Please specify how the file system is going to be used, so that optimal file "
"system parameters can be chosen for that use."
msgstr ""

#. Type: select
#. Description
#: ../partman-basicfilesystems.templates:155
msgid ""
"standard = standard parameters, news = one inode per 4KB block, largefile = "
"one inode per megabyte, largefile4 = one inode per 4 megabytes."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. This is an item in the menu "Partition settings"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. This is an item in the menu "Action on the partition"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. This is an item in the menu "Partition settings"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. This is an item in the menu "Partition settings"
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. This is an item in the menu "Partition settings"
#: ../partman-basicfilesystems.templates:167 ../partman-ext3.templates:32
#: ../partman-reiserfs.templates:32 ../partman-jfs.templates:32
#: ../partman-xfs.templates:32
msgid "Mount point:"
msgstr ""

#. Type: text
#. Description
#. In the following context: "Mount point: none"
#: ../partman-basicfilesystems.templates:172
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Mount point:\" ]"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:176
msgid "Ext2 file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-basicfilesystems.templates:181
msgid "ext2"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:185
msgid "FAT16 file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-basicfilesystems.templates:190
msgid "fat16"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:194
msgid "FAT32 file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-basicfilesystems.templates:199
msgid "fat32"
msgstr ""

#. Type: text
#. Description
#: ../partman-basicfilesystems.templates:212
msgid "swap area"
msgstr ""

#. Type: text
#. Description
#. Short variant of `swap space'
#: ../partman-basicfilesystems.templates:217
msgid "swap"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "noatime - do not update inode access times at each access"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "nodev - do not support character or block special devices"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "nosuid - ignore set-user-identifier or set-group-identifier bits"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "noexec - do not allow execution of any binaries"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-xfs.templates:44
#: ../partman-ext2r0.templates:60
msgid "usrquota - user disk quota accounting enabled"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-xfs.templates:44
#: ../partman-ext2r0.templates:60
msgid "grpquota - group disk quota accounting enabled"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:228 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44
msgid "user_xattr - support user extended attributes"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:237 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "ro - mount the file system read-only"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-basicfilesystems.templates:237 ../partman-ext3.templates:44
#: ../partman-reiserfs.templates:44 ../partman-jfs.templates:44
#: ../partman-xfs.templates:44 ../partman-ext2r0.templates:60
msgid "sync - all input/output activities occur synchronously"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../partman-basicfilesystems.templates:237
msgid "quiet - changing owner and permissions does not return errors"
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-basicfilesystems.templates:238 ../partman-ext3.templates:45
#: ../partman-reiserfs.templates:45 ../partman-jfs.templates:45
#: ../partman-xfs.templates:45 ../partman-ext2r0.templates:61
msgid "Mount options:"
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-basicfilesystems.templates:238 ../partman-ext3.templates:45
#: ../partman-reiserfs.templates:45 ../partman-jfs.templates:45
#: ../partman-xfs.templates:45 ../partman-ext2r0.templates:61
msgid "Mount options can tune the behavior of the file system."
msgstr ""

#. Type: text
#. Description
#: ../partman-ext3.templates:3
msgid ""
"Checking the ext3 file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext3.templates:7
msgid ""
"The test of the file system with type ext3 in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext3.templates:7 ../partman-reiserfs.templates:7
#: ../partman-jfs.templates:7 ../partman-xfs.templates:7
#: ../partman-ext2r0.templates:7
msgid ""
"If you do not go back to the partitioning menu and correct these errors, the "
"partition will not be used at all."
msgstr ""

#. Type: error
#. Description
#: ../partman-ext3.templates:16
msgid ""
"The ext3 file system creation in partition #${PARTITION} of ${DEVICE} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext3.templates:22
msgid ""
"No mount point is assigned for the ext3 file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-ext3.templates:51
msgid "Ext3 journaling file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-ext3.templates:56
msgid "ext3"
msgstr ""

#. Type: text
#. Description
#: ../partman-reiserfs.templates:3
msgid ""
"Checking the ReiserFS file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-reiserfs.templates:7
msgid ""
"The test of the file system with type ReiserFS in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""

#. Type: error
#. Description
#: ../partman-reiserfs.templates:16
msgid ""
"The ReiserFS file system creation in partition #${PARTITION} of ${DEVICE} "
"failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-reiserfs.templates:22
msgid ""
"No mount point is assigned for the ReiserFS file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: text
#. Description
#. File system name (untranslatable in many languages)
#: ../partman-reiserfs.templates:37
msgid "ReiserFS"
msgstr ""

#. Type: multiselect
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partman-reiserfs.templates:44
msgid "notail - disable packing of files into the file system tree"
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-reiserfs.templates:51
msgid "ReiserFS journaling file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-reiserfs.templates:56
msgid "reiserfs"
msgstr ""

#. Type: text
#. Description
#: ../partman-jfs.templates:3
msgid "Checking the jfs file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:7
msgid ""
"The test of the file system with type jfs in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""

#. Type: error
#. Description
#: ../partman-jfs.templates:16
msgid ""
"The jfs file system creation in partition #${PARTITION} of ${DEVICE} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:22
msgid ""
"No mount point is assigned for the jfs file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-jfs.templates:51
msgid "JFS journaling file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-jfs.templates:56
msgid "jfs"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:61
msgid "Use unrecommended JFS root file system?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:61
msgid ""
"Your root file system is a JFS file system. This can cause problems with the "
"boot loader used by default by this installer."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:61
msgid ""
"You should use a small /boot partition with another file system, such as "
"ext3."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:70
msgid "Use unrecommended JFS /boot file system?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:70
msgid ""
"You have mounted a JFS file system as /boot. This is likely to cause "
"problems with the boot loader used by default by this installer."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-jfs.templates:70
msgid ""
"You should use another file system, such as ext3, for the /boot partition."
msgstr ""

#. Type: text
#. Description
#: ../partman-xfs.templates:3
msgid "Checking the xfs file system in partition #${PARTITION} of ${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-xfs.templates:7
msgid ""
"The test of the file system with type xfs in partition #${PARTITION} of "
"${DEVICE} found uncorrected errors."
msgstr ""

#. Type: error
#. Description
#: ../partman-xfs.templates:16
msgid ""
"The xfs file system creation in partition #${PARTITION} of ${DEVICE} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-xfs.templates:22
msgid ""
"No mount point is assigned for the xfs file system in partition #"
"${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-xfs.templates:51
msgid "XFS journaling file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-xfs.templates:56
msgid "xfs"
msgstr ""

#. Type: text
#. Description
#: ../partman-ext2r0.templates:3
msgid ""
"Checking the ext2 (revision 0) file system in partition #${PARTITION} of "
"${DEVICE}..."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:7
msgid ""
"The test of the file system with type ext2 (revision 0) in partition #"
"${PARTITION} of ${DEVICE} found uncorrected errors."
msgstr ""

#. Type: error
#. Description
#: ../partman-ext2r0.templates:16
msgid ""
"The ext2 (revision 0) file system creation in partition #${PARTITION} of "
"${DEVICE} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:22
msgid ""
"No mount point is assigned for the ext2 (revision 0) file system in "
"partition #${PARTITION} of ${DEVICE}."
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-ext2r0.templates:67
msgid "old Ext2 (revision 0) file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-ext2r0.templates:72
msgid "ext2r0"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:76
msgid ""
"Your boot partition has not been configured with the old ext2 (revision 0) "
"file system.  This is needed by your machine in order to boot.  Please go "
"back and use the old ext2 (revision 0) file system."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:87
msgid ""
"Your boot partition is not located on the first primary partition of your "
"hard disk.  This is needed by your machine in order to boot.  Please go back "
"and use your first primary partition as a boot partition."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:98
msgid "Go back to the menu and correct this problem?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:98
msgid ""
"Your root partition is not a primary partition of your hard disk.  This is "
"needed by your machine in order to boot.  Please go back and use a primary "
"partition for your root partition."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-ext2r0.templates:98
msgid ""
"If you do not go back to the partitioning menu and correct this error, the "
"partition will be used as is.  This means that you may not be able to boot "
"from your hard disk."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid ""
"Partitioning a hard drive consists of dividing it to create the space needed "
"to install your new system.  You need to choose which partition(s) will be "
"used for the installation."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid "Select a free space to create partitions in it."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid ""
"Select a device to remove all partitions in it and create a new empty "
"partition table."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid ""
"Select a partition to remove it or to specify how it should be used. At a "
"bare minimum, you need one partition to contain the root of the file system "
"(whose mount point is /).  Most people also feel that a separate swap "
"partition is a necessity.  \"Swap\" is scratch space for an operating "
"system, which allows the system to use disk storage as \"virtual memory\"."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid ""
"When the partition is already formatted you may choose to keep and use the "
"existing data in the partition.  Partitions that will be used in this way "
"are marked with \"${KEEP}\" in the main partitioning menu."
msgstr ""

#. Type: note
#. Description
#: ../partman-target.templates:4
msgid ""
"In general you will want to format the partition with a newly created file "
"system.  NOTE: all data in the partition will be irreversibly deleted.  If "
"you decide to format a partition that is already formatted, it will be "
"marked with \"${DESTROY}\" in the main partitioning menu.  Otherwise it will "
"be marked with \"${FORMAT}\"."
msgstr ""

#. Type: text
#. Description
#: ../partman-target.templates:35
msgid ""
"In order to start your new system, a so called boot loader is used.  It can "
"be installed either in the master boot record of the first hard disk, or in "
"a partition.  When the boot loader is installed in a partition, you must set "
"the bootable flag for it. Such a partition will be marked with \"${BOOTABLE}"
"\" in the main partitioning menu."
msgstr ""

#. Type: text
#. Description
#: ../partman-target.templates:39
msgid ""
"In order to start your new system, a so called boot loader is used.  It is "
"installed in a boot partition.  You must set the bootable flag for the "
"partition.  Such a partition will be marked with \"${BOOTABLE}\" in the main "
"partitioning menu."
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:43
msgid "Identical mount points for two file systems"
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:43
msgid ""
"Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} "
"and ${PART2}."
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:43
msgid "Please correct this by changing mount points."
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:51
msgid "No root file system"
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:51
msgid "No root file system is defined."
msgstr ""

#. Type: error
#. Description
#: ../partman-target.templates:51
msgid "Please correct this from the partitioning menu."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-target.templates:58
msgid "Do you want to resume partitioning?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-target.templates:58
msgid ""
"The attempt to mount a file system with type ${TYPE} in ${DEVICE} at "
"${MOUNTPOINT} failed."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-target.templates:58
msgid "You may resume partitioning from the partitioning menu."
msgstr ""

#. Type: select
#. Description
#: ../partman-target.templates:67
msgid "How to use this partition:"
msgstr ""

#. Type: text
#. Description
#: ../partman-target.templates:71
msgid "Use as:"
msgstr ""

#. Type: text
#. Description
#: ../partman-target.templates:75
msgid "Help on partitioning"
msgstr ""

#. Type: select
#. Choices
#. Timezones for AQ.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. McMurdo, south pole, Rothera, Palmer, Mawson, Davis, Casey, Vostok, Dumont-d'Urville, Syowa
#: ../common.templates:19
msgid ""
"Antarctica/McMurdo, Antarctica/South_Pole, Antarctica/Rothera, Antarctica/"
"Palmer, Antarctica/Mawson, Antarctica/Davis, Antarctica/Casey, Antarctica/"
"Vostok, Antarctica/DumontDUrville, Antarctica/Syowa"
msgstr ""

#. Type: select
#. Choices
#. Timezones for AU.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Lord Howe Island, Hobart, Melbourne, Sydney, Broken Hill, Brisbane, Lindeman, Adelaide, Darwin, Perth
#: ../common.templates:36
msgid ""
"Australia/Lord_Howe, Australia/Hobart, Australia/Melbourne, Australia/"
"Sydney, Australia/Broken_Hill, Australia/Brisbane, Australia/Lindeman, "
"Australia/Adelaide, Australia/Darwin, Australia/Perth"
msgstr ""

#. Type: select
#. Choices
#. Timezones for BR.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Noronha, Belem, Fortaleza, Recife, Araguaina, Maceio, Bahia, Sao Paulo, Campo Grande, Cuiaba, Porto Velho, Boa Vista, Manaus, Eirunepe, Rio Branco
#: ../common.templates:53
msgid ""
"America/Noronha, America/Belem, America/Fortaleza, America/Recife, America/"
"Araguaina, America/Maceio, America/Bahia, America/Sao_Paulo, America/"
"Campo_Grande, America/Cuiaba, America/Porto_Velho, America/Boa_Vista, "
"America/Manaus, America/Eirunepe, America/Rio_Branco"
msgstr ""

#. Type: select
#. Choices
#. Timezones for CA.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Newfoundland, Atlantic, Eastern, Central, East Saskatchewan, Saskatchewan, Mountain, Pacific, Yukon
#: ../common.templates:70
msgid ""
"Canada/Newfoundland, Canada/Atlantic, Canada/Eastern, Canada/Central, Canada/"
"East-Saskatchewan, Canada/Saskatchewan, Canada/Mountain, Canada/Pacific, "
"Canada/Yukon"
msgstr ""

#. Type: select
#. Choices
#. Timezones for CD.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Kinshasa, Lubumbashi
#: ../common.templates:86
msgid "Africa/Kinshasa, Africa/Lubumbashi"
msgstr ""

#. Type: select
#. Choices
#. Timezones for CL.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Santiago, Easter Island
#: ../common.templates:102
msgid "America/Santiago, Pacific/Easter"
msgstr ""

#. Type: select
#. Choices
#. Timezones for EC.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Guayaquil, Galapagos
#: ../common.templates:118
msgid "America/Guayaquil, Pacific/Galapagos"
msgstr ""

#. Type: select
#. Choices
#. Timezones for ES.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Madrid, Ceuta, Canary Islands
#: ../common.templates:134
msgid "Europe/Madrid, Africa/Ceuta, Atlantic/Canary"
msgstr ""

#. Type: select
#. Choices
#. Timezones for FM.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Yap, Truk, Ponape, Kosrae
#: ../common.templates:150
msgid "Pacific/Yap, Pacific/Truk, Pacific/Ponape, Pacific/Kosrae"
msgstr ""

#. Type: select
#. Choices
#. Timezones for GL.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Godthab, Danmarkshavn, Scoresbysund, Thule
#: ../common.templates:166
msgid ""
"America/Godthab, America/Danmarkshavn, America/Scoresbysund, America/Thule"
msgstr ""

#. Type: select
#. Choices
#. Timezones for ID.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Jakarta, Pontianak, Makassar, Jayapura
#: ../common.templates:182
msgid "Asia/Jakarta, Asia/Pontianak, Asia/Makassar, Asia/Jayapura"
msgstr ""

#. Type: select
#. Choices
#. Timezones for KI.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Tarawa (Gilbert Islands), Enderbury (Phoenix Islands), Kiritimati (Line Islands)
#: ../common.templates:198
msgid "Pacific/Tarawa, Pacific/Enderbury, Pacific/Kiritimati"
msgstr ""

#. Type: select
#. Choices
#. Timezones for KZ.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Almaty, Qyzylorda, Aqtobe, Atyrau, Oral
#: ../common.templates:214
msgid "Asia/Almaty, Asia/Qyzylorda, Asia/Aqtobe, Asia/Aqtau, Asia/Oral"
msgstr ""

#. Type: select
#. Choices
#. Timezones for MN.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Ulaanbaatar, Hovd, Choibalsan
#: ../common.templates:230
msgid "Asia/Ulaanbaatar, Asia/Hovd, Asia/Choibalsan"
msgstr ""

#. Type: select
#. Description
#: ../common.templates:232
msgid "Select a city in your time zone:"
msgstr ""

#. Type: select
#. Choices
#. Timezones for MX.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Central, Mountain, Pacific
#: ../common.templates:246
msgid "Mexico/General, Mexico/BajaSur, Mexico/BajaNorte"
msgstr ""

#. Type: select
#. Choices
#. Timezones for NZ.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Auckland, Chatham Islands
#: ../common.templates:262
msgid "Pacific/Auckland, Pacific/Chatham"
msgstr ""

#. Type: select
#. Choices
#. Timezones for PF.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Tahiti (Society Islands), Marquesas Islands, Gambier Islands
#: ../common.templates:278
msgid "Pacific/Tahiti, Pacific/Marquesas, Pacific/Gambier"
msgstr ""

#. Type: select
#. Choices
#. Timezones for PT.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Lisbon, Madeira Islands, Azores
#: ../common.templates:294
msgid "Europe/Lisbon, Atlantic/Madeira, Atlantic/Azores"
msgstr ""

#. Type: select
#. Choices
#. Timezones for RU.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Moscow-01 - Kaliningrad, Moscow+00 - west Russia, Moscow+01 - Samara, Moscow+02 - Urals, Moscow+03 - west Siberia, Moscow+03 - Novosibirsk, Moscow+04 - Yenisei River, Moscow+05 - Lake Baikal, Moscow+06 - Lena River, Moscow+07 - Amur River, Moscow+07 - Sakhalin Island, Moscow+08 - Magadan, Moscow+09 - Kamchatka, Moscow+10 - Bering Sea
#: ../common.templates:311
msgid ""
"Europe/Kaliningrad, Europe/Moscow, Europe/Samara, Asia/Yekaterinburg, Asia/"
"Omsk, Asia/Novosibirsk, Asia/Krasnoyarsk, Asia/Irkutsk, Asia/Yakutsk, Asia/"
"Vladivostok, Asia/Sakhalin, Asia/Magadan, Asia/Kamchatka, Asia/Anadyr"
msgstr ""

#. Type: select
#. Choices
#. Timezones for UM.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Johnston Atoll, Midway Islands, Wake Island
#: ../common.templates:327
msgid "Pacific/Johnston, Pacific/Midway, Pacific/Wake"
msgstr ""

#. Type: select
#. Description
#: ../common.templates:329
msgid "Select a location in your time zone:"
msgstr ""

#. Type: select
#. Choices
#. Timezones for US.
#.
#. TRANSLATORS PLEASE NOTE: The msgid below looks strange because it is
#. a list of filenames (in /usr/share/zoneinfo). Do not translate the filenames.
#. Instead translate the English text which is displayed to the user instead
#. of these filenames. Also, many place names will not need translation
#. from the English text, but some parts may be translatable.
#.
#. The English text to translate for this list of timezones is:
#. Eastern, Central, Mountain, Pacific, Alaska, Hawaii, Arizona, East Indiana, Samoa
#: ../common.templates:344
msgid ""
"US/Eastern, US/Central, US/Mountain, US/Pacific, US/Alaska, US/Hawaii, US/"
"Arizona, US/East-Indiana, US/Samoa"
msgstr ""

#. Type: select
#. Description
#: ../common.templates:346
msgid "Select your time zone:"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../tzsetup-udeb.templates:4
msgid "Configure time zone"
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../tzsetup-udeb.templates:9
msgid "Saving time zone..."
msgstr ""

#. Type: note
#. Description
#: ../tzsetup-udeb.templates:13
msgid "Selected timezone"
msgstr ""

#. Type: note
#. Description
#: ../tzsetup-udeb.templates:13
msgid "Based on your country, your time zone is ${ZONE}."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../clock-setup.templates:4
msgid "Configure the clock"
msgstr ""

#. Type: boolean
#. Description
#: ../clock-setup.templates:9
msgid "Is the system clock set to UTC?"
msgstr ""

#. Type: boolean
#. Description
#: ../clock-setup.templates:9
msgid ""
"System clocks are generally set to Coordinated Universal Time (UTC). The "
"operating system uses your time zone to convert system time into local time. "
"This is recommended unless you also use another operating system that "
"expects the clock to be set to local time."
msgstr ""

#. Type: text
#. Description
#: ../clock-setup.templates:17
msgid "Setting up the clock"
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../clock-setup.templates:27
msgid "Saving UTC setting..."
msgstr ""

#. Type: boolean
#. Description
#: ../base-installer.templates:4
msgid "Proceed with installation to unclean target?"
msgstr ""

#. Type: boolean
#. Description
#: ../base-installer.templates:4
msgid ""
"The target file system contains files from a past installation. These files "
"could cause problems with the installation process, and if you proceed, some "
"of the existing files may be overwritten."
msgstr ""

#. Type: error
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#: ../base-installer.templates:13
msgid "Cannot install base system"
msgstr ""

#. Type: error
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#: ../base-installer.templates:13
msgid ""
"The installer cannot figure out how to install the base system. No "
"installable CD-ROM was found and no valid mirror was configured."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:19
msgid "Failed to determine the codename for the release."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:24
msgid "No file system mounted on /target"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:24
msgid ""
"Before the installation can proceed, a root file system must be mounted on /"
"target. The partitioner and formatter should have done this for you."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:30
msgid "Not installing to unclean target"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:30
msgid ""
"The installation to the target file system has been canceled. You should go "
"back and erase or format the target file system before proceeding with the "
"install."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:37
msgid "Failed to install the base system"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:37
msgid "The base system installation into /target/ failed."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:44
msgid ""
"The debootstrap program exited with an error (return value ${EXITCODE})."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:51
msgid "Base system installation error"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:51
msgid "The debootstrap program exited abnormally."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:59
msgid "The following error occurred:"
msgstr ""

#. Type: select
#. Description
#: ../base-installer.templates:69
msgid "Tool to use to generate boot initrd:"
msgstr ""

#. Type: select
#. Description
#: ../base-installer.templates:69
msgid ""
"The list shows the available tools. If you are unsure which to select, you "
"should select the default. If your system fails to boot, you can retry the "
"installation using the other options."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:76
msgid "No initrd generator"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:76
msgid ""
"The kernel that has been selected for installation needs an initrd to boot. "
"However, no package to generate that initrd is available that supports your "
"configuration. This would leave your system unable to boot."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:83
msgid "Unsupported initrd generator"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:83
msgid ""
"The package ${GENERATOR} that was selected to generate the initrd is not "
"supported."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:89
msgid "Unable to install the selected kernel"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:89
msgid ""
"An error was returned while trying to install the kernel into the target "
"system."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:89
msgid "Kernel package: '${KERNEL}'."
msgstr ""

#. Type: select
#. Choices
#. For base-installer, "none" is an additional choice to a list of kernels.
#. It means "no kernel"
#: ../base-installer.templates:102
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" means \"no kernel\" ]"
msgstr ""

#. Type: select
#. Description
#: ../base-installer.templates:103
msgid "Kernel to install:"
msgstr ""

#. Type: select
#. Description
#: ../base-installer.templates:103
msgid ""
"The list shows the available kernels. Please choose one of them in order to "
"make the system bootable from the hard drive."
msgstr ""

#. Type: boolean
#. Description
#: ../base-installer.templates:110
msgid "Continue without installing a kernel?"
msgstr ""

#. Type: boolean
#. Description
#: ../base-installer.templates:110
msgid "No installable kernel was found in the defined APT sources."
msgstr ""

#. Type: boolean
#. Description
#: ../base-installer.templates:110
msgid ""
"You may try to continue without a kernel, and manually install your own "
"kernel later. This is only recommended for experts, otherwise you will "
"likely end up with a machine that doesn't boot."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:119
msgid "Cannot install kernel"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:119
msgid "The installer cannot find a suitable kernel package to install."
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:124
msgid "Unable to install ${PACKAGE}"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:124
msgid ""
"An error was returned while trying to install the ${PACKAGE} package onto "
"the target system."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a Release file name.
#: ../base-installer.templates:133
msgid "Failed getting Release file ${SUBST0}."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a Release.gpg file name
#: ../base-installer.templates:139
msgid "Failed getting Release signature file ${SUBST0}."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a gpg key ID
#: ../base-installer.templates:145
msgid "Release file signed by unknown key (key id ${SUBST0})"
msgstr ""

#. Type: error
#. Description
#: ../base-installer.templates:150
msgid "Invalid Release file: no valid components."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a filename
#: ../base-installer.templates:156
msgid "Invalid Release file: no entry for ${SUBST0}."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../base-installer.templates:163
msgid "Debootstrap Error"
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../base-installer.templates:163
msgid ""
"Couldn't retrieve ${SUBST0}. This may be due to a network problem or a bad "
"CD, depending on your installation method."
msgstr ""

#. Type: error
#. Description
#. SUBST0 is a filename or package name
#. Debootstrap is a program name: should not be translated
#: ../base-installer.templates:163
msgid ""
"If you are installing from CD-R or CD-RW, burning the CD at a lower speed "
"may help."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:176
msgid "Preparing to install the base system..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:180 ../apt-setup-udeb.templates:15
#: ../finish-install.templates:12
msgid "Running ${SCRIPT}..."
msgstr ""

#. Type: text
#. Description
#. Release is a filename which should not be translated
#: ../base-installer.templates:185
msgid "Retrieving Release file"
msgstr ""

#. Type: text
#. Description
#. Release is a filename which should not be translated
#: ../base-installer.templates:190
msgid "Retrieving Release file signature"
msgstr ""

#. Type: text
#. Description
#. "packages" here can be translated
#: ../base-installer.templates:195
msgid "Finding package sizes"
msgstr ""

#. Type: text
#. Description
#. Packages is a filename which should not be translated
#: ../base-installer.templates:200
msgid "Retrieving Packages files"
msgstr ""

#. Type: text
#. Description
#. Packages is a filename which should not be translated
#: ../base-installer.templates:205
msgid "Retrieving Packages file"
msgstr ""

#. Type: text
#. Description
#. "packages" here can be translated
#: ../base-installer.templates:210
msgid "Retrieving packages"
msgstr ""

#. Type: text
#. Description
#. "packages" here can be translated
#: ../base-installer.templates:215
msgid "Extracting packages"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:219
msgid "Installing the base system"
msgstr ""

#. Type: text
#. Description
#. Core packages are packages that are part of the Debian base system
#. The "core" packages are indeed packages that are specifically
#. recorded as part of the base system. Other packages may
#. be installed on the base system because of dependency resolution
#: ../base-installer.templates:227
msgid "Installing core packages"
msgstr ""

#. Type: text
#. Description
#. Required packages are packages which installation is triggered
#. by the dependency chain of core packages
#. In short, they are "required" because at least one of the
#. packages from the core packages depends on them
#: ../base-installer.templates:235
msgid "Unpacking required packages"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:239
msgid "Configuring required packages"
msgstr ""

#. Type: text
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#: ../base-installer.templates:245
msgid "Unpacking the base system"
msgstr ""

#. Type: text
#. Description
#. The base system is the minimal Debian system
#. See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7
#: ../base-installer.templates:251
msgid "Configuring the base system"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:255
msgid "${SECTION}: ${INFO}..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:260
msgid "Validating ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:265
msgid "Retrieving ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:270
msgid "Extracting ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:275
msgid "Unpacking ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:280
msgid "Configuring ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#. Release is a filename which should not be translated
#: ../base-installer.templates:285
msgid "Checking Release signature"
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a gpg key id
#. Release is a filename which should not be translated
#: ../base-installer.templates:291
msgid "Valid Release signature (key id ${SUBST0})"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:295
msgid "Resolving dependencies of base packages..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a list of packages
#: ../base-installer.templates:300
msgid "Found additional base dependencies: ${SUBST0}"
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a list of packages
#: ../base-installer.templates:305
msgid "Found additional required dependencies: ${SUBST0}"
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a list of packages
#: ../base-installer.templates:310
msgid "Found packages in base already in required: ${SUBST0}"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:314
msgid "Resolving dependencies of required packages..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is an archive component (main, etc)
#. SUBST1 is a mirror
#: ../base-installer.templates:320
msgid "Checking component ${SUBST0} on ${SUBST1}..."
msgstr ""

#. Type: text
#. Description
#. Core packages are packages that are part of the Debian base system
#. The "core" packages are indeed packages that are specifically
#. recorded as part of the base system. Other packages may
#. be installed on the base system because of dependency resolution
#: ../base-installer.templates:328
msgid "Installing core packages..."
msgstr ""

#. Type: text
#. Description
#. Required packages are packages which installation is triggered
#. by the dependency chain of core packages
#. In short, they are "required" because at least one of the
#. packages from the core packages depends on them
#: ../base-installer.templates:336
msgid "Unpacking required packages..."
msgstr ""

#. Type: text
#. Description
#. Required packages are packages which installation is triggered
#. by the dependency chain of core packages
#. In short, they are "required" because at least one of the
#. packages from the core packages depends on them
#: ../base-installer.templates:344
msgid "Configuring required packages..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:348
msgid "Installing base packages..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:352
msgid "Unpacking the base system..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:356
msgid "Configuring the base system..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:360
msgid "Base system installed successfully."
msgstr ""

#. Type: error
#. Description
#. Debootstrap is a program name: should not be translated
#: ../base-installer.templates:365
msgid "Debootstrap warning"
msgstr ""

#. Type: error
#. Description
#. Debootstrap is a program name: should not be translated
#: ../base-installer.templates:365
msgid "Warning: ${INFO}"
msgstr ""

#. Type: text
#. Description
#. SUBST0 is an url
#: ../base-installer.templates:371
msgid "Retrying failed download of ${SUBST0}"
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:375
msgid "Configuring APT sources..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:379
msgid "Updating the list of available packages..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:383
msgid "Installing extra packages..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:388
msgid "Installing extra packages - retrieving and installing ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:392
msgid "Creating device files..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:396
msgid "Selecting the kernel to install..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:400
msgid "Installing the kernel..."
msgstr ""

#. Type: text
#. Description
#. SUBST0 is a package name
#: ../base-installer.templates:405
msgid "Installing the kernel - retrieving and installing ${SUBST0}..."
msgstr ""

#. Type: text
#. Description
#: ../base-installer.templates:409
msgid "Installing the PCMCIA modules"
msgstr ""

#. Type: text
#. Description
#. Item in the main menu to select this package
#. TRANSLATORS: <65 columns
#: ../base-installer.templates:415
msgid "Install the base system"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. MUST be kept below 55 characters/columns
#: ../apt-setup-udeb.templates:5
msgid "Configure the package manager"
msgstr ""

#. Type: text
#. Description
#. Translators, "apt" is the program name
#. so please do NOT translate it
#: ../apt-setup-udeb.templates:11
msgid "Configuring apt"
msgstr ""

#. Type: text
#. Description
#: ../apt-setup-udeb.templates:19
msgid "Scanning local repositories..."
msgstr ""

#. Type: text
#. Description
#: ../apt-setup-udeb.templates:23
msgid "Scanning the security updates repository..."
msgstr ""

#. Type: error
#. Description
#: ../apt-setup-udeb.templates:33
msgid "Cannot access security updates"
msgstr ""

#. Type: error
#. Description
#: ../apt-setup-udeb.templates:33
msgid ""
"The security updates on ${SECURITY_HOST} couldn't be accessed, so those "
"updates will not be made available to you at this time. You should "
"investigate this later."
msgstr ""

#. Type: error
#. Description
#: ../apt-setup-udeb.templates:33
msgid ""
"Commented out entries for ${SECURITY_HOST} have been added to the /etc/apt/"
"sources.list file."
msgstr ""

#. Type: text
#. Description
#: ../apt-cdrom-setup.templates:3
msgid "Scanning the CD-ROM..."
msgstr ""

#. Type: error
#. Description
#: ../apt-cdrom-setup.templates:7
msgid "apt configuration problem"
msgstr ""

#. Type: error
#. Description
#: ../apt-cdrom-setup.templates:7
msgid ""
"An attempt to configure apt to install additional packages from the CD "
"failed."
msgstr ""

#. Type: text
#. Description
#: ../apt-mirror-setup.templates:3
msgid "Scanning the mirror..."
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:8
msgid "Use non-free software?"
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:8
msgid ""
"Some non-free software has been made to work with Debian. Though this "
"software is not at all a part of Debian, standard Debian tools can be used "
"to install it. This software has varying licenses which may prevent you from "
"using, modifying, or sharing it."
msgstr ""

#. Type: boolean
#. Description
#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates:8 ../apt-mirror-setup.templates-ubuntu:5
msgid "Please choose whether you want to have it available anyway."
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:19
msgid "Use contrib software?"
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:19
msgid ""
"Some additional software has been made to work with Debian. Though this "
"software is free, it depends on non-free software for its operation. This "
"software is not a part of Debian, but standard Debian tools can be used to "
"install it."
msgstr ""

#. Type: boolean
#. Description
#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates:19 ../apt-mirror-setup.templates-ubuntu:41
msgid ""
"Please choose whether you want this software to be made available to you."
msgstr ""

#. Type: select
#. Choices
#. These are choices of actions so this is, at least in English,
#. an infinitive form
#: ../apt-mirror-setup.templates:32
msgid "Ignore"
msgstr ""

#. Type: select
#. Description
#: ../apt-mirror-setup.templates:33
msgid ""
"The installer failed to access the mirror. This may be a problem with your "
"network, or with the mirror. You can choose to retry the download, select a "
"different mirror, or ignore the problem and continue without all the "
"packages from this mirror."
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:42
msgid "Use a network mirror?"
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:42
msgid ""
"A network mirror can be used to supplement the software that is included on "
"the CD-ROM. This may also make newer versions of software available."
msgstr ""

#. Type: boolean
#. Description
#: ../apt-mirror-setup.templates:42
msgid ""
"If you are installing from a netinst CD and you choose not to use a mirror, "
"you will end up with only a very minimal base system."
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:5
msgid "Use restricted software?"
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:5
msgid ""
"Some non-free software is available in packaged form. Though this software "
"is not a part of the main distribution, standard package management tools "
"can be used to install it. This software has varying licenses which may "
"prevent you from using, modifying, or sharing it."
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:17
msgid "Use software from the \"universe\" component?"
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:17
msgid ""
"Some additional software is available in packaged form. This software is "
"free and, though it is not a part of the main distribution, standard package "
"management tools can be used to install it."
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:28
msgid "Use software from the \"multiverse\" component?"
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:28
msgid ""
"Some non-free software is available in packaged form. Though this software "
"is not a part of the main distribution, standard package management tools "
"can be used to install it. This software has varying licenses and (in some "
"cases) patent restrictions which may prevent you from using, modifying, or "
"sharing it."
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:41
msgid "Use backported software?"
msgstr ""

#. Type: boolean
#. Description
#. This template is used by the Ubuntu version of d-i.
#: ../apt-mirror-setup.templates-ubuntu:41
msgid ""
"Some software has been backported from the development tree to work with "
"this release. Although this software has not gone through such complete "
"testing as that contained in the release, it includes newer versions of some "
"applications which may provide useful features."
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:22
msgid "Allow login as root?"
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:22
msgid ""
"If you choose not to allow root to log in, then a user account will be "
"created and given the power to become root using the 'sudo' command."
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:28
msgid "Root password:"
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:28
msgid ""
"You need to set a password for 'root', the system administrative account. A "
"malicious or unqualified user with root access can have disastrous results, "
"so you should take care to choose a root password that is not easy to guess. "
"It should not be a word found in dictionaries, or a word that could be "
"easily associated with you."
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:28
msgid "Note that you will not be able to see the password as you type it."
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:42
msgid ""
"Please enter the same root password again to verify that you have typed it "
"correctly."
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:49
msgid "Create a normal user account now?"
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:49
msgid ""
"It's a bad idea to use the root account for normal day-to-day activities, "
"such as the reading of electronic mail, because even a small mistake can "
"result in disaster. You should create a normal user account to use for those "
"day-to-day tasks."
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:49
msgid ""
"Note that you may create it later (as well as any additional account) by "
"typing 'adduser <username>' as root, where <username> is an username, like "
"'imurdock' or 'rms'."
msgstr ""

#. Type: string
#. Description
#: ../user-setup-udeb.templates:61
msgid "Full name for the new user:"
msgstr ""

#. Type: string
#. Description
#: ../user-setup-udeb.templates:61
msgid ""
"A user account will be created for you to use instead of the root account "
"for non-administrative activities."
msgstr ""

#. Type: string
#. Description
#: ../user-setup-udeb.templates:61
msgid ""
"Please enter the real name of this user. This information will be used for "
"instance as default origin for emails sent by this user as well as any "
"program which displays or uses the user's real name. Your full name is a "
"reasonable choice."
msgstr ""

#. Type: string
#. Description
#: ../user-setup-udeb.templates:72
msgid "Username for your account:"
msgstr ""

#. Type: string
#. Description
#: ../user-setup-udeb.templates:72
msgid ""
"Select a username for the new account. Your first name is a reasonable "
"choice. The username should start with a lower-case letter, which can be "
"followed by any combination of numbers and more lower-case letters."
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:79
msgid "Invalid username"
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:79
msgid ""
"The username you entered is invalid. Note that usernames must start with a "
"lower-case letter, which can be followed by any combination of numbers and "
"more lower-case letters."
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:86
msgid "Reserved username"
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:86
msgid ""
"The username you entered (${USERNAME}) is reserved for use by the system. "
"Please select a different one."
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:92
msgid "Choose a password for the new user:"
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:92
msgid ""
"A good password will contain a mixture of letters, numbers and punctuation "
"and should be changed at regular intervals."
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:98 ../network-console.templates:40
msgid "Re-enter password to verify:"
msgstr ""

#. Type: password
#. Description
#: ../user-setup-udeb.templates:98
msgid ""
"Please enter the same user password again to verify you have typed it "
"correctly."
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:104
msgid "Password input error"
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:104
msgid "The two passwords you entered were not the same. Please try again."
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:109 ../network-console.templates:46
msgid "Empty password"
msgstr ""

#. Type: error
#. Description
#: ../user-setup-udeb.templates:109 ../network-console.templates:46
msgid ""
"You entered an empty password, which is not allowed. Please choose a non-"
"empty password."
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:116
msgid "Enable shadow passwords?"
msgstr ""

#. Type: boolean
#. Description
#: ../user-setup-udeb.templates:116
msgid ""
"Shadow passwords make your system more secure because nobody is able to view "
"even encrypted passwords. The passwords are stored in a separate file that "
"can only be read by special programs. The use of shadow passwords is "
"strongly recommended, except in a few cases such as NIS environments."
msgstr ""

#. Type: title
#. Description
#: ../user-setup-udeb.templates:124
msgid "Set up users and passwords"
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../user-setup-udeb.templates:129
msgid "Setting users and passwords..."
msgstr ""

#. Type: select
#. Choices
#: ../cdebconf-udeb.templates:9
msgid "critical"
msgstr ""

#. Type: select
#. Choices
#: ../cdebconf-udeb.templates:9
msgid "high"
msgstr ""

#. Type: select
#. Choices
#: ../cdebconf-udeb.templates:9
msgid "medium"
msgstr ""

#. Type: select
#. Choices
#: ../cdebconf-udeb.templates:9
msgid "low"
msgstr ""

#. Type: select
#. Description
#: ../cdebconf-udeb.templates:11
msgid "Ignore questions with a priority less than:"
msgstr ""

#. Type: select
#. Description
#: ../cdebconf-udeb.templates:11
msgid ""
"Packages that use debconf for configuration prioritize the questions they "
"might ask you. Only questions with a certain priority or higher are actually "
"shown to you; all less important questions are skipped."
msgstr ""

#. Type: select
#. Description
#: ../cdebconf-udeb.templates:11
msgid ""
"You can select the lowest priority of question you want to see:\n"
" - 'critical' is for items that will probably break the system\n"
"    without user intervention.\n"
" - 'high' is for items that don't have reasonable defaults.\n"
" - 'medium' is for normal items that have reasonable defaults.\n"
" - 'low' is for trivial items that have defaults that will work in\n"
"   the vast majority of cases."
msgstr ""

#. Type: select
#. Description
#: ../cdebconf-udeb.templates:11
msgid ""
"For example, this question is of medium priority, and if your priority were "
"already 'high' or 'critical', you wouldn't see this question."
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-priority.templates:3
msgid "Change debconf priority"
msgstr ""

#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#: ../cdebconf-newt-udeb.templates:4 ../cdebconf-gtk-udeb.templates:4
msgid "Continue"
msgstr ""

#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#: ../cdebconf-newt-udeb.templates:9 ../cdebconf-gtk-udeb.templates:9
msgid "Go Back"
msgstr ""

#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#. Type: text
#. Description
#: ../cdebconf-newt-udeb.templates:14 ../cdebconf-gtk-udeb.templates:14
#: ../cdebconf-slang-udeb.templates:4 ../cdebconf-text-udeb.templates:23
msgid "Yes"
msgstr ""

#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#. Type: text
#. Description
#: ../cdebconf-newt-udeb.templates:19 ../cdebconf-gtk-udeb.templates:19
#: ../cdebconf-slang-udeb.templates:9 ../cdebconf-text-udeb.templates:27
msgid "No"
msgstr ""

#. Type: text
#. Description
#. Help line displayed at the bottom of the cdebconf newt interface.
#. Translators: must fit within 80 characters.
#: ../cdebconf-newt-udeb.templates:30
msgid "<Tab> moves between items; <Space> selects; <Enter> activates buttons"
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This should be "translated" to "RTL" or "LTR" depending of
#. default text direction of your language
#. LTR: Left to Right (Latin, Cyrillic, CJK, Indic...)
#. RTL: Right To Left (Arabic, Hebrew, Persian...)
#. DO NOT USE ANYTHING ELSE
#: ../cdebconf-gtk-udeb.templates:28
msgid "LTR"
msgstr ""

#. Type: text
#. Description
#. Translators, this text will appear on a button, so KEEP IT SHORT
#. This button will allow users to virtually "shoot a picture"
#. of the screen
#: ../cdebconf-gtk-udeb.templates:35
msgid "Screenshot"
msgstr ""

#. Type: text
#. Description
#. Text that will appear in a dialog box mentioning which file
#. the screenshot has been saved to. "%s" is a file name here
#: ../cdebconf-gtk-udeb.templates:41
#, no-c-format
msgid "Screenshot saved as %s"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:3
#, no-c-format
msgid "!! ERROR: %s"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:7
msgid "KEYSTROKES:"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:11
msgid "Display this help message"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:15
msgid "Go back to previous question"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:19
msgid "Select an empty entry"
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:31
#, no-c-format
msgid "Prompt: '%c' for help, default=%d> "
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:35
#, no-c-format
msgid "Prompt: '%c' for help> "
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:39
#, no-c-format
msgid "Prompt: '%c' for help, default=%s> "
msgstr ""

#. Type: text
#. Description
#: ../cdebconf-text-udeb.templates:43
msgid "[Press enter to continue]"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. should not be more than 55 columns
#. pkgsel is the module that installs packages by running tasksel to
#. select "tasks". Please use "install *software*" and not
#. "install *packages*" which is less adapted for non technical users
#: ../pkgsel.templates:8
msgid "Select and install software"
msgstr ""

#. Type: text
#. Description
#. This appears in a progress bar when running pkgsel
#. The text is used when pkgsel is launched, before it installs packages
#: ../pkgsel.templates:14
msgid "Setting up..."
msgstr ""

#. Type: text
#. Description
#. This appears in a progress bar when running pkgsel
#. The text is used when running tasksel to allow selecting packages
#. Tasksel will then display its own screens
#: ../pkgsel.templates:21
msgid "Running tasksel..."
msgstr ""

#. Type: text
#. Description
#. This appears in a progress bar when running pkgsel
#. The text is used at the end of the installation phase while
#. cleaning up pkgsel's stuff
#: ../pkgsel.templates:28
msgid "Cleaning up..."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../finish-install.templates:4
msgid "Finish the installation"
msgstr ""

#. Type: text
#. Description
#: ../finish-install.templates:8
msgid "Finishing the installation"
msgstr ""

#. Type: text
#. Description
#: ../finish-install.templates:16
msgid "Configuring network..."
msgstr ""

#. Type: text
#. Description
#: ../finish-install.templates:20
msgid "Setting up frame buffer..."
msgstr ""

#. Type: text
#. Description
#: ../finish-install.templates:24
msgid "Unmounting file systems..."
msgstr ""

#. Type: text
#. Description
#: ../finish-install.templates:28
msgid "Rebooting into your new system..."
msgstr ""

#. Type: note
#. Description
#: ../finish-install.templates:32
msgid "Installation complete"
msgstr ""

#. Type: note
#. Description
#: ../finish-install.templates:32
msgid ""
"Installation is complete, so it is time to boot into your new system. Make "
"sure to remove the installation media (CD-ROM, floppies), so that you boot "
"into the new system rather than restarting the installation."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../nobootloader.templates:4
msgid "Continue without boot loader"
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:9 ../yaboot-installer.templates:98
msgid ""
"Some variables need to be set in the Genesi firmware in order for your "
"system to boot automatically.  At the end of the installation, the system "
"will reboot.  At the firmware prompt, set the following firmware variables "
"to enable auto-booting:"
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:9 ../yaboot-installer.templates:98
msgid ""
"Alternatively, you will be able to boot the kernel manually by entering, at "
"the firmware prompt:"
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:31 ../yaboot-installer.templates:98
msgid "Setting firmware variables for automatic boot"
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:31
msgid ""
"Some variables need to be set in the Netwinder NeTTrom firmware in order for "
"your system to boot linux automatically.  At the end of this installation "
"stage, the system will reboot, and the firmware will attempt to autoboot.  "
"You can abort this by pressing any key. You will then be dropped into the "
"NeTTrom command system where you have to execute the following commands:"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: note
#. Description
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../nobootloader.templates:31 ../yaboot-installer.templates:98
#: ../arcboot-installer.templates:34
msgid ""
"You will only need to do this once.  Afterwards, enter the \"boot\" command "
"or reboot the system to proceed to your newly installed system."
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:51
msgid "No boot loader installed"
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:51
msgid ""
"No boot loader has been installed, either because you chose not to or "
"because your specific architecture doesn't support a boot loader yet."
msgstr ""

#. Type: note
#. Description
#: ../nobootloader.templates:51
msgid ""
"You will need to boot manually with the ${KERNEL} kernel on partition "
"${BOOT} and ${ROOT} passed as a kernel argument."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:4
msgid ""
"The following other operating systems have been detected on this computer: "
"${OS_LIST}"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:4
msgid ""
"If all of your operating systems are listed above, then it should be safe to "
"install the boot loader to the master boot record of your first hard drive. "
"When your computer boots, you will be able to choose to load one of these "
"operating systems or your new system."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:16
msgid "Install the GRUB boot loader to the master boot record?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:16
msgid ""
"It seems that this new installation is the only operating system on this "
"computer. If so, it should be safe to install the GRUB boot loader to the "
"master boot record of your first hard drive."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:16
msgid ""
"Warning: If the installer failed to detect another operating system that is "
"present on your computer, modifying the master boot record will make that "
"operating system temporarily unbootable, though GRUB can be manually "
"configured later to boot it."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:29
msgid "Install the GRUB boot loader to XFS file system?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:29
msgid ""
"The GRUB boot loader installation often fails or hangs when /boot is on a "
"XFS file system. Using LILO in this situation is recommended."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#: ../grub-installer.templates:35 ../yaboot-installer.templates:45
#: ../aboot-installer.templates:12
msgid "Device for boot loader installation:"
msgstr ""

#. Type: string
#. Description
#: ../grub-installer.templates:35
msgid ""
"You need to make the newly installed system bootable, by installing the GRUB "
"boot loader on a bootable device. The usual way to do this is to install "
"GRUB on the master boot record of your first hard drive. If you prefer, you "
"can install GRUB elsewhere on the drive, or to another drive, or even to a "
"floppy."
msgstr ""

#. Type: string
#. Description
#: ../grub-installer.templates:35
msgid ""
"The device can be specified using GRUB's \"(hdn,m)\" notation, or as a "
"device in /dev. Below are some examples:\n"
" - \"(hd0)\" or \"/dev/hda\" will install GRUB to the master boot record\n"
"   of your first hard drive (IDE);\n"
" - \"(hd0,1)\" or \"/dev/hda2\" will use the second partition of your\n"
"   first IDE drive;\n"
" - \"(hd2,4)\" or \"/dev/sdc5\" will use the first extended partition of\n"
"   your third drive (SCSI here);\n"
" - \"(fd0)\" or \"/dev/fd0\" will install GRUB to a floppy."
msgstr ""

#. Type: password
#. Description
#: ../grub-installer.templates:54
msgid "GRUB password:"
msgstr ""

#. Type: password
#. Description
#: ../grub-installer.templates:54
msgid ""
"The GRUB boot loader offers many powerful interactive features, which could "
"be used to compromise your system if unauthorized users have access to the "
"machine when it is starting up. To defend against this, you may choose a "
"password which will be required before editing menu entries or entering the "
"GRUB command-line interface. By default, any user will still be able to "
"start any menu entry without entering the password."
msgstr ""

#. Type: password
#. Description
#: ../grub-installer.templates:54
msgid "If you do not wish to set a GRUB password, leave this field blank."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:73
msgid "GRUB installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-installer.templates:73
msgid ""
"The grub package failed to install into /target/.  Installing GRUB as a boot "
"loader is a required step.  The install problem might however be unrelated "
"to GRUB, so continuing the installation may be possible."
msgstr ""

#. Type: error
#. Description
#: ../grub-installer.templates:80
msgid "Unable to install GRUB in ${BOOTDEV}"
msgstr ""

#. Type: error
#. Description
#: ../grub-installer.templates:80
msgid "Executing 'grub-install ${BOOTDEV}' failed."
msgstr ""

#. Type: error
#. Description
#: ../grub-installer.templates:87
msgid "Unable to configure GRUB"
msgstr ""

#. Type: error
#. Description
#: ../grub-installer.templates:87
msgid "Executing 'update-grub' failed."
msgstr ""

#. Type: error
#. Description
#: ../grub-installer.templates:87
msgid "This is a fatal error."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:105
msgid "Installing GRUB boot loader"
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:109
msgid "Looking for other operating systems..."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:113
msgid "Installing the 'grub' package..."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:117
msgid "Determining GRUB boot device..."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:121
msgid "Running \"grub-install ${BOOTDEV}\"..."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:125
msgid "Running \"update-grub\"..."
msgstr ""

#. Type: text
#. Description
#: ../grub-installer.templates:129
msgid "Updating /etc/kernel-img.conf..."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../grub-installer.templates:134
msgid "Install the GRUB boot loader on a hard disk"
msgstr ""

#. Type: text
#. Description
#. Rescue menu item
#: ../grub-installer.templates:139
msgid "Reinstall GRUB boot loader"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../lilo-installer.templates:6
msgid "${disc}: Master Boot Record"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../lilo-installer.templates:6
msgid "${part}: new Debian partition"
msgstr ""

#. Type: select
#. Description
#: ../lilo-installer.templates:7
msgid ""
"The LILO program needs to be installed to make your new system bootable. By "
"installing it onto your disk's Master Boot Record, LILO will take complete "
"control of the boot process, but if you want to use a different boot "
"manager, just install LILO on the new Debian partition instead."
msgstr ""

#. Type: select
#. Description
#: ../lilo-installer.templates:7
msgid "If unsure, install LILO into the Master Boot Record."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../lilo-installer.templates:20
msgid "${disc}: software RAID array"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../lilo-installer.templates:20
msgid "Other choice (Advanced)"
msgstr ""

#. Type: select
#. Description
#: ../lilo-installer.templates:21
msgid ""
"The LILO program needs to be installed to make your new system bootable. You "
"may choose to install it onto a software RAID array or another device."
msgstr ""

#. Type: string
#. Description
#: ../lilo-installer.templates:29
msgid "LILO installation target:"
msgstr ""

#. Type: string
#. Description
#: ../lilo-installer.templates:29
msgid ""
"Please enter the partition or disk onto which LILO should be installed. "
"Devfs style names, such as those that start with /dev/ide, /dev/scsi, and /"
"dev/discs are accepted, as well as traditional names, such as /dev/hda or /"
"dev/sda."
msgstr ""

#. Type: error
#. Description
#: ../lilo-installer.templates:37
msgid "Invalid partition name"
msgstr ""

#. Type: error
#. Description
#: ../lilo-installer.templates:37
msgid ""
"The path ${path} does not represent a partition or hard disk device. Please "
"try again."
msgstr ""

#. Type: text
#. Description
#: ../lilo-installer.templates:43
msgid "Installing LILO..."
msgstr ""

#. Type: text
#. Description
#: ../lilo-installer.templates:47
msgid "Activating partition ${bootdev}"
msgstr ""

#. Type: text
#. Description
#: ../lilo-installer.templates:51
msgid "Creating lilo.conf"
msgstr ""

#. Type: text
#. Description
#: ../lilo-installer.templates:55
msgid "Installing the LILO package"
msgstr ""

#. Type: text
#. Description
#: ../lilo-installer.templates:59
msgid "Running LILO for ${bootdev}"
msgstr ""

#. Type: note
#. Description
#: ../lilo-installer.templates:63
msgid "LILO configured to use a serial console"
msgstr ""

#. Type: note
#. Description
#: ../lilo-installer.templates:63
msgid ""
"LILO is configured to use serial port ${PORT} as the console. The serial "
"port speed is set to ${SPEED}."
msgstr ""

#. Type: boolean
#. Description
#: ../lilo-installer.templates:70
msgid "Would you like to make this partition active?"
msgstr ""

#. Type: boolean
#. Description
#: ../lilo-installer.templates:70
msgid ""
"You have chosen to install LILO on a partition that is not the active one. "
"If this partition is not marked active, then LILO will not be loaded by the "
"boot loader.  This may cause you to be unable to boot into the system that "
"is being installed."
msgstr ""

#. Type: boolean
#. Description
#: ../lilo-installer.templates:70
msgid ""
"You should make this partition active unless you have another boot loader "
"that will allow you to access your new Linux installation."
msgstr ""

#. Type: boolean
#. Description
#: ../lilo-installer.templates:82
msgid "LILO installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../lilo-installer.templates:82
msgid ""
"The lilo package failed to install into /target/.  Installing LILO as a boot "
"loader is a required step.  The install problem might however be unrelated "
"to LILO, so continuing the installation may be possible."
msgstr ""

#. Type: error
#. Description
#: ../lilo-installer.templates:89
msgid "LILO installation failed"
msgstr ""

#. Type: error
#. Description
#: ../lilo-installer.templates:89
msgid "Running \"/sbin/lilo\" failed with error code \"${ERRCODE}\"."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../lilo-installer.templates:95
msgid "Install the LILO boot loader on a hard disk"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-newworld.templates:7
msgid ""
"No NewWorld boot partition was found. The yaboot boot loader requires an "
"Apple_Bootstrap partition at least 819200 bytes in size, using the HFS "
"Macintosh file system."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-newworld.templates:14 ../partman-prep.templates:20
#: ../partman-palo.templates:12 ../partman-efi.templates:11
msgid "Go back to the menu and resume partitioning?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-newworld.templates:14
msgid "The NewWorld boot partition must be at least 819200 bytes in size."
msgstr ""

#. Type: text
#. Description
#: ../partman-newworld.templates:26
msgid "NewWorld boot partition"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. short variant of 'NewWorld boot partition'
#. Up to 10 character positions
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. short variant of 'PALO boot partition'
#. Up to 10 character positions
#: ../partman-newworld.templates:32 ../partman-palo.templates:23
msgid "boot"
msgstr ""

#. Type: text
#. Description
#. File system name
#: ../partman-newworld.templates:37
msgid "HFS Macintosh file system"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#: ../partman-newworld.templates:42
msgid "hfs"
msgstr ""

#. Type: text
#. Description
#. A bit of context for translators :
#. PReP stands for PowerPC Reference Platform, is an acronym, and should not be
#. translated. The PReP boot partition is a partition of type 0x41, which is
#. used by PReP boxes and IBM CHRP boxes to boot yaboot or the kernel from.
#: ../partman-prep.templates:7
msgid "Use the partition as a PowerPC PReP boot partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-prep.templates:11
msgid "PowerPC PReP boot partition"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-prep.templates:15
msgid "No PowerPC PReP boot partition is found."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-prep.templates:20
msgid "The PowerPC PReP boot partition must be in the first 8MB."
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:3
msgid "Installing quik"
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:7
msgid "Installing quik boot loader"
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:12
msgid "quik installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:12
msgid ""
"The quik package failed to install into /target/.  Installing quik as a boot "
"loader is a required step.  The install problem might however be unrelated "
"to quik, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:19
msgid "Checking partitions"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:23 ../yaboot-installer.templates:33
#: ../prep-installer.templates:32 ../vmelilo-installer.templates:23
msgid "No root partition found"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:23 ../yaboot-installer.templates:33
#: ../prep-installer.templates:32 ../vmelilo-installer.templates:23
msgid ""
"No partition is mounted as your new root partition. You must mount a root "
"partition first."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:29
msgid "Root partition not on first disk"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:29
msgid ""
"The quik boot loader requires the root partition to be on the first disk. "
"Please return to the partitioning step."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:35
msgid "Boot partition not on first disk"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:35
msgid ""
"The quik boot loader requires the boot partition to be on the first disk. "
"Please return to the partitioning step."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:41
msgid "Boot partition must be on ext2"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:41
msgid ""
"The quik boot loader requires the partition that holds /boot to be formatted "
"using the ext2 file system. Please return to the partitioning step."
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:48
msgid ""
"You have chosen to install the quik boot loader. You will not be able to "
"boot any other operating system from this disk. Furthermore, your machine "
"may not be bootable in any manner after this process completes. If you are "
"left with a blank screen, you may need to try a cold boot and hold down "
"Command-Option-P-R."
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:60
msgid "Do you really want to install the quik boot loader?"
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:60
msgid ""
"You have chosen to install the quik boot loader. You will not be able to "
"boot any other operating system from this disk. Furthermore, your machine "
"may not be bootable in any manner after this process completes."
msgstr ""

#. Type: boolean
#. Description
#: ../quik-installer.templates:60
msgid "Be aware that this code has not been thoroughly tested."
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:69
msgid "Creating quik configuration"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:73
msgid "Failed to create quik configuration"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:73
msgid "The creation of the main quik configuration file failed."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:82
msgid "Failed to resolve kernel symlink"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:82
msgid ""
"/vmlinux or /boot/vmlinux in the installed system appears not to be a "
"symlink to a kernel image. This is probably a bug."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:88
msgid "Failed to resolve initrd symlink"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:88
msgid ""
"/initrd.img or /boot/initrd.img in the installed system appears not to be a "
"symlink to an initial RAM disk image. This is probably a bug."
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:94
msgid "Installing quik into bootstrap partition"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:98 ../yaboot-installer.templates:72
#: ../vmelilo-installer.templates:46
msgid "Failed to install boot loader"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:98
msgid "The installation of the quik boot loader failed."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:98
msgid "Warning: your system may be unbootable!"
msgstr ""

#. Type: text
#. Description
#: ../quik-installer.templates:107
msgid "Setting up OpenFirmware"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:111
msgid "Unable to configure OpenFirmware"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:111
msgid ""
"Setting the OpenFirmware boot-device variable failed. You will have to "
"configure OpenFirmware yourself to boot."
msgstr ""

#. Type: error
#. Description
#. This error may not be fatal, depending on the exact type of Mac.
#: ../quik-installer.templates:118
msgid "Problem configuring OpenFirmware"
msgstr ""

#. Type: error
#. Description
#. This error may not be fatal, depending on the exact type of Mac.
#: ../quik-installer.templates:118
msgid ""
"Setting the OpenFirmware boot-command variable failed. You may have "
"intermittent boot failures."
msgstr ""

#. Type: note
#. Description
#: ../quik-installer.templates:124
msgid "Successfully installed quik"
msgstr ""

#. Type: note
#. Description
#: ../quik-installer.templates:124
msgid "The quik boot loader was successfully installed."
msgstr ""

#. Type: note
#. Description
#: ../quik-installer.templates:124 ../yaboot-installer.templates:81
#: ../prep-installer.templates:42
msgid "The new system is now ready to boot."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:131 ../yaboot-installer.templates:88
msgid "Failed to mount /target/proc"
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:131 ../yaboot-installer.templates:88
msgid "Mounting the proc file system on /target/proc failed."
msgstr ""

#. Type: error
#. Description
#: ../quik-installer.templates:131 ../yaboot-installer.templates:88
#: ../vmelilo-installer.templates:46
msgid "Warning: Your system may be unbootable!"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../quik-installer.templates:141
msgid "Install quik on a hard disk"
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:3
msgid "Installing Yaboot"
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:7
msgid "Installing Yaboot boot loader"
msgstr ""

#. Type: boolean
#. Description
#: ../yaboot-installer.templates:12
msgid "Yaboot installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../yaboot-installer.templates:12
msgid ""
"The yaboot package failed to install into /target/.  Installing Yaboot as a "
"boot loader is a required step.  The install problem might however be "
"unrelated to Yaboot, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:19
msgid "Looking for bootstrap partitions"
msgstr ""

#. Type: error
#. Description
#: ../yaboot-installer.templates:23
msgid "No bootstrap partition found"
msgstr ""

#. Type: error
#. Description
#: ../yaboot-installer.templates:23
msgid ""
"No hard disks were found which have an \"Apple_Bootstrap\" partition.  You "
"must create an 819200-byte partition with type \"Apple_Bootstrap\"."
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:29
msgid "Looking for root partition"
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:39
msgid "Looking for other operating systems"
msgstr ""

#. Type: select
#. Description
#: ../yaboot-installer.templates:45
msgid ""
"Yaboot (the Linux boot loader) needs to be installed on a hard disk "
"partition in order for your system to be bootable.  Please choose the "
"destination partition from among these partitions that have the bootable "
"flag set."
msgstr ""

#. Type: select
#. Description
#: ../yaboot-installer.templates:45
msgid "Warning: this will erase all data on the selected partition!"
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:55
msgid "Creating yaboot configuration"
msgstr ""

#. Type: error
#. Description
#: ../yaboot-installer.templates:59
msgid "Failed to create yaboot configuration"
msgstr ""

#. Type: error
#. Description
#: ../yaboot-installer.templates:59
msgid "The creation of the main yaboot configuration file failed."
msgstr ""

#. Type: text
#. Description
#: ../yaboot-installer.templates:68
msgid "Installing yaboot into bootstrap partition"
msgstr ""

#. Type: error
#. Description
#: ../yaboot-installer.templates:72
msgid "The installation of the yaboot boot loader failed."
msgstr ""

#. Type: note
#. Description
#: ../yaboot-installer.templates:81
msgid "Successfully installed yaboot"
msgstr ""

#. Type: note
#. Description
#: ../yaboot-installer.templates:81
msgid "The yaboot boot loader was successfully installed."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../yaboot-installer.templates:120
msgid "Install yaboot on a hard disk"
msgstr ""

#. Type: text
#. Description
#. Rescue menu item
#: ../yaboot-installer.templates:125
msgid "Reinstall yaboot boot loader"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. Keep translations below 55 ccolumns (1 character=1 column
#. except for wide character languages such as Chinese/Japanese/Korean)
#. A bit of context for translators :
#. PReP stands for PowerPC Reference Platform, is an acronym, and should not be
#. translated. The PReP boot partition is a partition of type 0x41, which is
#. used by PReP boxes and IBM CHRP boxes to boot yaboot or the kernel from.
#: ../prep-installer.templates:10
msgid "Install the kernel on a PReP boot partition"
msgstr ""

#. Type: text
#. Description
#: ../prep-installer.templates:18
msgid "Looking for PReP boot partitions"
msgstr ""

#. Type: error
#. Description
#: ../prep-installer.templates:22
msgid "No PReP boot partitions"
msgstr ""

#. Type: error
#. Description
#: ../prep-installer.templates:22
msgid ""
"No PReP boot partitions were found. You must create a PReP boot partition "
"within the first 8MB of your hard disk."
msgstr ""

#. Type: text
#. Description
#: ../prep-installer.templates:28
msgid "Looking for the root partition"
msgstr ""

#. Type: text
#. Description
#: ../prep-installer.templates:38
msgid "Copying the kernel to the PReP boot partition"
msgstr ""

#. Type: note
#. Description
#: ../prep-installer.templates:42
msgid "Successfully installed PReP"
msgstr ""

#. Type: note
#. Description
#: ../prep-installer.templates:42
msgid "The kernel was properly copied to the PReP boot partition."
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:3
msgid "Failed to retrieve the preconfiguration file"
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:3
msgid ""
"The file needed for preconfiguration could not be retrieved from "
"${LOCATION}. The installation will proceed in non-automated mode."
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:9
msgid "Failed to process the preconfiguration file"
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:9
msgid ""
"The installer failed to process the preconfiguration file from ${LOCATION}. "
"The file may be corrupt."
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:50
msgid "Failed to run preseeded command"
msgstr ""

#. Type: error
#. Description
#: ../preseed-common.templates:50
msgid ""
"Execution of preseeded command \"${COMMAND}\" failed with exit code ${CODE}."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../network-preseed.templates:4
msgid "Download debconf preconfiguration file"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../file-preseed.templates:4
msgid "Load debconf preconfiguration file"
msgstr ""

#. Type: title
#. Description
#. Info message displayed when running in rescue mode
#: ../rescue-check.templates:10
msgid "Rescue mode"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:3
msgid "Enter rescue mode"
msgstr ""

#. Type: select
#. Description
#: ../rescue-mode.templates:8
msgid "Device to use as root file system:"
msgstr ""

#. Type: select
#. Description
#: ../rescue-mode.templates:8
msgid ""
"Enter a device you wish to use as your root file system. You will be able to "
"choose among various rescue operations to perform on this file system."
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:14
msgid "No such device"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:14
msgid ""
"The device you entered for your root file system (${DEVICE}) does not exist. "
"Please try again."
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:20
msgid "Mount failed"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:20
msgid ""
"An error occurred while mounting the device you entered for your root file "
"system (${DEVICE}) on /target."
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:20
msgid "Please check the syslog for more information."
msgstr ""

#. Type: select
#. Description
#: ../rescue-mode.templates:31
msgid "Rescue operations"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:35
msgid "Rescue operation failed"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:35
msgid "The rescue operation '${OPERATION}' failed with exit code ${CODE}."
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:41
msgid "Execute a shell in ${DEVICE}"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:46
msgid "Execute a shell in the installer environment"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:51
msgid "Choose a different root file system"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:56
msgid "Reboot the system"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:60
msgid ""
"After this message, you will be given a shell with ${DEVICE} mounted on \"/"
"\". If you need any other file systems (such as a separate \"/usr\"), you "
"will have to mount those yourself."
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:67
msgid "Error running shell in /target"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:67
msgid ""
"A shell (${SHELL}) was found on your root file system (${DEVICE}), but an "
"error occurred while running it."
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:73
msgid "No shell found in /target"
msgstr ""

#. Type: error
#. Description
#: ../rescue-mode.templates:73
msgid "No usable shell was found on your root file system (${DEVICE})."
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:78
msgid "Executing a shell"
msgstr ""

#. Type: text
#. Description
#: ../rescue-mode.templates:78
msgid ""
"After this message, you will be given a shell with ${DEVICE} mounted on \"/"
"target\". You may work on it using the tools available in the installer "
"environment. If you want to make it your root file system temporarily, run "
"\"chroot /target\". If you need any other file systems (such as a separate "
"\"/usr\"), you will have to mount those yourself."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../iso-scan.templates:4
msgid "Scan hard drives for an installer ISO image"
msgstr ""

#. Type: text
#. Description
#: ../iso-scan.templates:19
msgid "Detecting hardware to find hard drives"
msgstr ""

#. Type: text
#. Description
#: ../iso-scan.templates:23
msgid "Searching drives for an installer ISO image"
msgstr ""

#. Type: text
#. Description
#: ../iso-scan.templates:27
msgid "Mounting ${DRIVE}..."
msgstr ""

#. Type: text
#. Description
#: ../iso-scan.templates:31
msgid "Scanning ${DRIVE} (in ${DIRECTORY})..."
msgstr ""

#. Type: boolean
#. Description
#: ../iso-scan.templates:36
msgid "Do full disk search for installer ISO image?"
msgstr ""

#. Type: boolean
#. Description
#: ../iso-scan.templates:36
msgid ""
"The quick scan for installer ISO images, which looks only in common places, "
"did not find an installer ISO image. It's possible that a more thorough "
"search will find the ISO image, but it may take a long time."
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:44
msgid ""
"No installer ISO images were found. If you downloaded the ISO image, it may "
"have a bad filename (not ending in \".iso\"), or it may be on a file system "
"that could not be mounted. You'll have to do a network install instead, or "
"reboot and fix the ISO image."
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:52
msgid "Failed to find an installer ISO image"
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:52
msgid ""
"While one or more possible ISO images were found, they could not be mounted. "
"The ISO image you downloaded may be corrupt."
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:60
msgid "No installer ISO image found"
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:60
msgid ""
"While one or more possible ISO images were found, they did not look like "
"valid installer ISO images."
msgstr ""

#. Type: error
#. Description
#: ../iso-scan.templates:60
msgid "Please do a network install instead, or reboot and fix the ISO image."
msgstr ""

#. Type: note
#. Description
#: ../iso-scan.templates:68
msgid "Successfully mounted ${SUITE} installer ISO image"
msgstr ""

#. Type: note
#. Description
#: ../iso-scan.templates:68
msgid ""
"The ISO file ${FILENAME} on ${DEVICE} (${SUITE}) will be used as the "
"installation ISO image."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../load-iso.templates:4
msgid "Load installer components from an installer ISO"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../save-logs.templates:4
msgid "Save debug logs"
msgstr ""

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#: ../save-logs.templates:9
msgid "floppy"
msgstr ""

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#: ../save-logs.templates:9
msgid "web"
msgstr ""

#. Type: select
#. Choices
#. Possible locations for debug logs to be saved
#: ../save-logs.templates:9
msgid "mounted file system"
msgstr ""

#. Type: select
#. Description
#: ../save-logs.templates:10
msgid "How should the debug logs be saved or transferred?"
msgstr ""

#. Type: select
#. Description
#: ../save-logs.templates:10
msgid ""
"Debugging log files for the installer can be saved to floppy, served up over "
"the web, or saved to a mounted file system."
msgstr ""

#. Type: string
#. Description
#: ../save-logs.templates:17
msgid "Directory in which to save debug logs:"
msgstr ""

#. Type: string
#. Description
#: ../save-logs.templates:17
msgid ""
"Please make sure the file system you want to save debug logs on is mounted "
"before you continue."
msgstr ""

#. Type: error
#. Description
#: ../save-logs.templates:23
msgid "Cannot save logs"
msgstr ""

#. Type: error
#. Description
#: ../save-logs.templates:23
msgid "The directory \"${DIR}\" does not exist."
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:28
msgid "Web server started, but network not running"
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:28
msgid ""
"A simple web server has been started on this computer to serve log files and "
"debug info. However, the network is not set up yet. The web server will be "
"left running, and will be accessible once the network is configured."
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:36
msgid "Web server started"
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:36
msgid ""
"A simple web server has been started on this computer to serve log files and "
"debug info. An index of all the available log files can be found at http://"
"${ADDRESS}/"
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:43
msgid "Insert formatted floppy in drive"
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:43
msgid "Log files and debug info will be copied into this floppy."
msgstr ""

#. Type: note
#. Description
#: ../save-logs.templates:43
msgid ""
"The information will also be stored in /var/log/installer/ on the installed "
"system."
msgstr ""

#. Type: error
#. Description
#: ../save-logs.templates:51
msgid "Failed to mount the floppy"
msgstr ""

#. Type: error
#. Description
#: ../save-logs.templates:51
msgid ""
"Either the floppy device cannot be found, or a formatted floppy is not in "
"the drive."
msgstr ""

#. Type: text
#. Description
#. finish-install progress bar item
#: ../save-logs.templates:58
msgid "Gathering information for installation report..."
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-checker.templates:4
msgid "Check CD-ROM integrity?"
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-checker.templates:4
msgid "Warning: this check depends on your hardware and may take some time."
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:9
msgid "Insert a Debian CD-ROM"
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:9
msgid ""
"Please insert one of the official Debian CD-ROMs into the drive before "
"continuing."
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:15
msgid "Failed to mount CD-ROM"
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:15
msgid ""
"The CD-ROM ${CDROM} could not be mounted correctly. Please check the media "
"and cables, and try it again."
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:21
msgid "No valid Debian CD-ROM"
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:21
msgid ""
"The CD-ROM you have inserted is not a valid Debian CD-ROM. Please change the "
"disk."
msgstr ""

#. Type: error
#. Description
#. TRANSLATORS: MD5 is a file name, don't translate it.
#: ../cdrom-checker.templates:28
msgid "Failed to open checksum file"
msgstr ""

#. Type: error
#. Description
#. TRANSLATORS: MD5 is a file name, don't translate it.
#: ../cdrom-checker.templates:28
msgid ""
"Opening the MD5 file on the CD-ROM failed. This file contains the checksums "
"of the files located on the CD-ROM."
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:34
msgid "Integrity test successful"
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:34
msgid "The CD-ROM integrity test was successful. The CD-ROM is valid."
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:39
msgid "Integrity test failed"
msgstr ""

#. Type: error
#. Description
#: ../cdrom-checker.templates:39
msgid ""
"The ${FILE} file failed the MD5 checksum verification. Your CD-ROM or this "
"file may have been corrupted."
msgstr ""

#. Type: boolean
#. Description
#: ../cdrom-checker.templates:46
msgid "Check the integrity of another CD-ROM?"
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:50
msgid "Insert Debian boot CD-ROM"
msgstr ""

#. Type: note
#. Description
#: ../cdrom-checker.templates:50
msgid ""
"Please make sure you have inserted the Debian boot CD-ROM  to continue with "
"the installation."
msgstr ""

#. Type: text
#. Description
#: ../cdrom-checker.templates:56
msgid "Checking CD-ROM integrity"
msgstr ""

#. Type: text
#. Description
#: ../cdrom-checker.templates:60
msgid "Checking file: ${FILE}"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. Translators: keep it under 65 columns
#: ../cdrom-checker.templates:66
msgid "Check the CD-ROM(s) integrity"
msgstr ""

#. Type: text
#. Description
#: ../network-console.templates:5
msgid "Continue installation remotely using SSH"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../network-console.templates:12
msgid "Start menu"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../network-console.templates:12
msgid "Start shell"
msgstr ""

#. Type: select
#. Description
#: ../network-console.templates:14
msgid "Network console option:"
msgstr ""

#. Type: select
#. Description
#: ../network-console.templates:14
msgid ""
"This is the network console for the Debian installer. From here, you may "
"start the Debian installer main menu, or execute an interactive shell."
msgstr ""

#. Type: select
#. Description
#: ../network-console.templates:14
msgid "To return to this menu, you will need to log in again."
msgstr ""

#. Type: text
#. Description
#: ../network-console.templates:23
msgid "Generating SSH host key"
msgstr ""

#. Type: password
#. Description
#: ../network-console.templates:27
msgid "Remote installation password:"
msgstr ""

#. Type: password
#. Description
#: ../network-console.templates:27
msgid ""
"You need to set a password for remote access to the Debian installer. A "
"malicious or unqualified user with access to the installer can have "
"disastrous results, so you should take care to choose a password that is not "
"easy to guess. It should not be a word found in the dictionary, or a word "
"that could be easily associated with you, like your middle name."
msgstr ""

#. Type: password
#. Description
#: ../network-console.templates:27
msgid ""
"This password is used only by the Debian installer, and will be discarded "
"once you finished the installation."
msgstr ""

#. Type: password
#. Description
#: ../network-console.templates:40
msgid ""
"Please enter the same remote installation password again to verify that you "
"have typed it correctly."
msgstr ""

#. Type: error
#. Description
#: ../network-console.templates:52
msgid "Password mismatch"
msgstr ""

#. Type: error
#. Description
#: ../network-console.templates:52
msgid ""
"The two passwords you entered were not the same. Please enter a password "
"again."
msgstr ""

#. Type: note
#. Description
#: ../network-console.templates:58
msgid "Start SSH"
msgstr ""

#. Type: note
#. Description
#: ../network-console.templates:58
msgid ""
"To continue the installation, please use an SSH client to connect to the IP "
"address ${ip} and log in as the \"installer\" user."
msgstr ""

#. Type: note
#. Description
#: ../network-console.templates:58
msgid "The fingerprint of this SSH server's host key is: ${fingerprint}"
msgstr ""

#. Type: note
#. Description
#: ../network-console.templates:58
msgid ""
"Please check this carefully against the fingerprint reported by your SSH "
"client."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-palo.templates:7
msgid "No PALO partition was found."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-palo.templates:12
msgid "The PALO partition must be in the first 2GB."
msgstr ""

#. Type: text
#. Description
#: ../partman-palo.templates:17
msgid "PALO boot partition"
msgstr ""

#. Type: text
#. Description
#: ../partman-efi.templates:3
msgid ""
"In order to start your new system, the firmware on your Itanium system loads "
"the boot loader from its private EFI partition on the hard disk.  The boot "
"loader then loads the operating system from that same partition.  An EFI "
"partition has a FAT16 file system formatted on it and the bootable flag set. "
"Most installations place the EFI partition on the first primary partition of "
"the same hard disk that holds the root file system."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-efi.templates:11
msgid "No EFI partition was found."
msgstr ""

#. Type: text
#. Description
#: ../partman-efi.templates:16
msgid "EFI boot partition"
msgstr ""

#. Type: text
#. Description
#. short variant of 'EFI boot partition'
#. Up to 10 character positions
#: ../partman-efi.templates:22
msgid "EFIboot"
msgstr ""

#. Type: text
#. Description
#: ../partman-efi.templates:30
msgid "EFI-fat16"
msgstr ""

#. Type: select
#. Description
#: ../elilo-installer.templates:4
msgid "Partition for boot loader installation:"
msgstr ""

#. Type: select
#. Description
#: ../elilo-installer.templates:4
msgid ""
"Partitions currently available in your system are listed. Please choose the "
"one you want elilo to use to boot your new system."
msgstr ""

#. Type: error
#. Description
#: ../elilo-installer.templates:10
msgid "No boot partitions detected"
msgstr ""

#. Type: error
#. Description
#: ../elilo-installer.templates:10
msgid ""
"There were no suitable partitions found for elilo to use.  Elilo needs a "
"partition with a FAT file system, and the boot flag set."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../elilo-installer.templates:17
msgid "Install the elilo boot loader on a hard disk"
msgstr ""

#. Type: text
#. Description
#: ../elilo-installer.templates:21
msgid "Installing the ELILO package"
msgstr ""

#. Type: text
#. Description
#: ../elilo-installer.templates:25
msgid "Running ELILO for ${bootdev}"
msgstr ""

#. Type: boolean
#. Description
#: ../elilo-installer.templates:30
msgid "ELILO installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../elilo-installer.templates:30
msgid ""
"The elilo package failed to install into /target/.  Installing ELILO as a "
"boot loader is a required step.  The install problem might however be "
"unrelated to ELILO, so continuing the installation may be possible."
msgstr ""

#. Type: error
#. Description
#: ../elilo-installer.templates:37
msgid "ELILO installation failed"
msgstr ""

#. Type: error
#. Description
#: ../elilo-installer.templates:37
msgid "Running \"/usr/sbin/elilo\" failed with error code \"${ERRCODE}\"."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:4
msgid "Aboot installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:4
msgid ""
"The aboot package failed to install into /target/.  Installing aboot as a "
"boot loader is a required step.  The install problem might however be "
"unrelated to aboot, so continuing the installation may be possible."
msgstr ""

#. Type: select
#. Description
#: ../aboot-installer.templates:12
msgid ""
"Aboot needs to install the boot loader on a bootable device containing an "
"ext2 partition.  Please select the ext2 partition that you wish aboot to "
"use.  If this is not the root file system, your kernel image and the "
"configuration file /etc/aboot.conf will be copied to that partition."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:22
msgid "Install /boot on a disk with an unsupported partition table?"
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:22
msgid ""
"To be bootable from the SRM console, aboot and the kernel it loads must be "
"installed on a disk which uses BSD disklabels for its partition table.  "
"Your /boot directory is not located on such a disk.  If you proceed, you "
"will not be able to boot your system using aboot, and will need to boot it "
"some other way."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:32
msgid "Use unsupported file system type for /boot?"
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:32
msgid ""
"Aboot requires /boot to be located on an ext2 partition on a bootable "
"device.  This means that either the root partition must be an ext2 file "
"system, or you must have a separate ext2 partition mounted at /boot."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:32
msgid ""
"Currently, /boot is located on a partition of type ${PARTTYPE}.  If you keep "
"this setting, you will not be able to boot your Debian system using aboot."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:45
msgid "Install without aboot?"
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:45
msgid ""
"Your /boot directory is located on a disk that has no space for the aboot "
"boot loader.  To install aboot, you must have a special aboot partition at "
"the beginning of your disk."
msgstr ""

#. Type: boolean
#. Description
#: ../aboot-installer.templates:45
msgid ""
"If you continue without correcting this problem, aboot will not be installed "
"and you will not be able to boot your new system from the SRM console."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../aboot-installer.templates:57
msgid "Install aboot on a hard disk"
msgstr ""

#. Type: error
#. Description
#: ../aboot-installer.templates:61
msgid "No ext2 partitions found"
msgstr ""

#. Type: error
#. Description
#: ../aboot-installer.templates:61
msgid ""
"No ext2 file systems were found on your computer.  To load the Linux kernel "
"from the SRM console, aboot needs an ext2 partition on a disk that has been "
"partitioned with BSD disklabels.  You will need to configure at least one "
"ext2 partition on your system before continuing."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:69
msgid "Installing the aboot boot loader"
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:73
msgid "Installing the 'aboot' package..."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:77
msgid "Determining aboot boot device..."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:81
msgid "Installing aboot on ${BOOTDISK}..."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:85
msgid "Configuring aboot to use partition ${PARTNUM}..."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:89
msgid "Copying kernel images to ${BOOTDEV}..."
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:97
msgid "Aboot boot partition"
msgstr ""

#. Type: text
#. Description
#: ../aboot-installer.templates:101
msgid "aboot"
msgstr ""

#. Type: text
#. Description
#: ../vmelilo-installer.templates:3
msgid "Installing vmelilo"
msgstr ""

#. Type: text
#. Description
#: ../vmelilo-installer.templates:7
msgid "Installing vmelilo boot loader"
msgstr ""

#. Type: boolean
#. Description
#: ../vmelilo-installer.templates:12
msgid "vmelilo installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../vmelilo-installer.templates:12
msgid ""
"The vmelilo package failed to install into /target/.  Installing vmelilo as "
"a boot loader is a required step.  The install problem might however be "
"unrelated to vmelilo, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#: ../vmelilo-installer.templates:19
msgid "Looking for root partition..."
msgstr ""

#. Type: text
#. Description
#: ../vmelilo-installer.templates:29
msgid "Creating vmelilo configuration..."
msgstr ""

#. Type: error
#. Description
#: ../vmelilo-installer.templates:33
msgid "Failed to create vmelilo configuration"
msgstr ""

#. Type: error
#. Description
#: ../vmelilo-installer.templates:33
msgid "The creation of the vmelilo configuration file failed."
msgstr ""

#. Type: text
#. Description
#: ../vmelilo-installer.templates:42
msgid "Installing vmelilo into bootstrap partition..."
msgstr ""

#. Type: error
#. Description
#: ../vmelilo-installer.templates:46
msgid "The installation of the vmelilo boot loader failed."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../vmelilo-installer.templates:56
msgid "Install the vmelilo boot loader on a hard disk"
msgstr ""

#. Type: boolean
#. Description
#: ../silo-installer.templates:4
msgid "SILO installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../silo-installer.templates:4
msgid ""
"The 'silo' package failed to install into /target/.  Installing SILO as a "
"boot loader is a required step.  The install problem might however be "
"unrelated to SILO, so continuing the installation may be possible."
msgstr ""

#. Type: error
#. Description
#: ../silo-installer.templates:11
msgid "SILO installation failed"
msgstr ""

#. Type: error
#. Description
#: ../silo-installer.templates:11
msgid "Running \"/sbin/silo\" failed with error code \"${ERRCODE}\"."
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:16
msgid "SILO installation successful"
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:16
msgid ""
"The SILO boot loader has been successfully installed on your new boot "
"partition, and your system should now be able to boot itself."
msgstr ""

#. Type: text
#. Description
#. Main menu text
#: ../silo-installer.templates:23
msgid "Install the SILO boot loader on a hard disk"
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:27
msgid "Unsupported boot file system type"
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:27
msgid ""
"In order to be successfully loaded by SILO (Sparc Linux Loader), the kernel "
"must reside on an ext2, ext3 or ufs formatted partition. In the current "
"partitioning scheme the kernel is going to be installed on the ${SILO_PART} "
"partition of type ${SILO_TYPE}."
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:39
msgid "Boot partition may cause problems with SILO"
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:39
msgid ""
"This machine is likely to suffer from a firmware bug, which makes it "
"impossible for SILO (Sparc Linux Loader) to boot a kernel placed farther "
"than 1 GB from the beginning of the disk."
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:39
msgid ""
"To avoid problems it is strongly recommended to install the kernel into a "
"partition which fits entirely within the first GB of the disk (by creating a "
"small /boot partition in the beginning of the disk, for example). In the "
"current partitioning scheme it is going to be installed onto the "
"${SILO_PART} partition which extends up to ${SILO_OFF} mark. Keeping this "
"configuration may result in an unbootable system."
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:53
msgid "Unsupported partition table on the boot disk"
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:53
msgid ""
"SILO (Sparc Linux Loader) can only boot the kernel off a disk with the \"sun"
"\" partition table. In the current partitioning scheme the kernel is going "
"to be installed on the ${SILO_PART} partition located on a disk with the "
"partition table of type \"${SILO_DISK}\"."
msgstr ""

#. Type: note
#. Description
#: ../silo-installer.templates:53
msgid ""
"It is strongly recommended that you go back to partitioning and correct this "
"problem. Keeping the current configuration may result in an unbootable "
"system."
msgstr ""

#. Type: text
#. Description
#: ../arcboot-installer.templates:3
msgid "Install the Arcboot boot loader on a hard disk"
msgstr ""

#. Type: string
#. Description
#: ../arcboot-installer.templates:9 ../delo-installer.templates:4
msgid "Disk for boot loader installation:"
msgstr ""

#. Type: string
#. Description
#: ../arcboot-installer.templates:9
msgid ""
"Arcboot must be installed into the volume header of a disk with a SGI "
"disklabel. Usually the volume header of /dev/sda is used. Please give the "
"device name of the disk on which to put arcboot."
msgstr ""

#. Type: note
#. Description
#: ../arcboot-installer.templates:16
msgid "Arcboot configured to use a serial console"
msgstr ""

#. Type: note
#. Description
#: ../arcboot-installer.templates:16
msgid ""
"Arcboot is configured to use the serial port ${PORT} as the console. The "
"serial port speed is set to ${SPEED}."
msgstr ""

#. Type: boolean
#. Description
#: ../arcboot-installer.templates:22
msgid "Arcboot installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../arcboot-installer.templates:22
msgid ""
"The arcboot package failed to install into /target/.  Installing Arcboot as "
"a boot loader is a required step.  The install problem might however be "
"unrelated to Arcboot, so continuing the installation may be possible."
msgstr ""

#. Type: note
#. Description
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:34
msgid "Setting PROM variables for Arcboot"
msgstr ""

#. Type: note
#. Description
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#: ../arcboot-installer.templates:34
msgid ""
"If this is the first Linux installation on this machine, or if the hard "
"drives have been repartitioned, some variables need to be set in the PROM "
"before the system is able to boot normally."
msgstr ""

#. Type: note
#. Description
#. Translators, the 4th string of this description has been dropped from
#. PO files. It contains firmware commands and should not be translated.
#. "Stop for Maintenance" should be left in English
#: ../arcboot-installer.templates:34
msgid ""
"At the end of this installation stage, the system will reboot.  After this, "
"enter the command monitor from the \"Stop for Maintenance\" option, and "
"enter the following commands:"
msgstr ""

#. Type: boolean
#. Description
#: ../sibyl-installer.templates:4
msgid "SiByl boot loader installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../sibyl-installer.templates:4
msgid ""
"The SiByl package failed to install into /target/.  Installing SiByl as a "
"boot loader is a required step.  The install problem might however be "
"unrelated to SiByl, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#: ../sibyl-installer.templates:11
msgid "Installing the SiByl boot loader"
msgstr ""

#. Type: text
#. Description
#: ../sibyl-installer.templates:15
msgid "Installing the SiByl package"
msgstr ""

#. Type: text
#. Description
#: ../sibyl-installer.templates:19
msgid "Creating SiByl configuration"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../sibyl-installer.templates:24
msgid "Install the SiByl boot loader on a hard disk"
msgstr ""

#. Type: text
#. Description
#: ../sibyl-installer.templates:28
msgid "SiByl boot partition"
msgstr ""

#. Type: boolean
#. Description
#: ../colo-installer.templates:4
msgid "Cobalt boot loader installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../colo-installer.templates:4
msgid ""
"The CoLo package failed to install into /target/.  Installing CoLo as a boot "
"loader is a required step.  The install problem might however be unrelated "
"to CoLo, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#: ../colo-installer.templates:11
msgid "Installing the Cobalt boot loader"
msgstr ""

#. Type: text
#. Description
#: ../colo-installer.templates:15
msgid "Installing the CoLo package"
msgstr ""

#. Type: text
#. Description
#: ../colo-installer.templates:19
msgid "Creating CoLo configuration"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../colo-installer.templates:24
msgid "Install the Cobalt boot loader on a hard disk"
msgstr ""

#. Type: string
#. Description
#: ../delo-installer.templates:4
msgid ""
"Delo must be installed into the boot sector of a disk with a DOS partition "
"table. Usually the boot sector of /dev/sda is used. Please give the device "
"name of the disk on which to put delo."
msgstr ""

#. Type: note
#. Description
#: ../delo-installer.templates:11
msgid "Delo configured to use a serial console"
msgstr ""

#. Type: note
#. Description
#: ../delo-installer.templates:11
msgid "Delo is configured to use the serial port ${PORT} as the console."
msgstr ""

#. Type: boolean
#. Description
#: ../delo-installer.templates:16
msgid "Delo installation failed.  Continue anyway?"
msgstr ""

#. Type: boolean
#. Description
#: ../delo-installer.templates:16
msgid ""
"The delo package failed to install into /target/.  Installing delo as a boot "
"loader is a required step.  The install problem might however be unrelated "
"to delo, so continuing the installation may be possible."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../delo-installer.templates:24
msgid "Install the Delo boot loader on a hard disk"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../mdcfg-utils.templates:4
msgid "Configure MD devices"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:8
msgid "Multidisk (MD) not available"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:8
msgid ""
"The current kernel doesn't seem to support multidisk devices. This should be "
"solved by loading the needed modules."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../mdcfg-utils.templates:17
msgid "Create MD device"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../mdcfg-utils.templates:17
msgid "Delete MD device"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Choices
#. TRANSLATORS, please translate "Finish" the same way you translate it in
#. the " Select "Finish" at the bottom of the list when you are done" string
#: ../mdcfg-utils.templates:17 ../partman-lvm.templates:87
#: ../partconf.templates:16 ../partitioner.templates:4
#: ../s390-dasd.templates:1001
msgid "Finish"
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:18
msgid "Multidisk configuration actions"
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:18
msgid "This is the Multidisk (MD) and software RAID configuration menu."
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:18
msgid ""
"Please select one of the proposed actions to configure multidisk devices."
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:25
msgid "No RAID partitions available"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:25
msgid ""
"No unused partitions of the type \"Linux RAID Autodetect\" are available. "
"Please create such a partition, or delete an already used multidisk device "
"to free its partitions."
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:25
msgid ""
"If you have such partitions, they might contain actual file systems, and are "
"therefore not available for use by this configuration utility."
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:35
msgid "Not enough RAID partitions available"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:35
msgid ""
"There are not enough RAID partitions available for your selected "
"configuration.  You have ${NUM_PART} RAID partitions available but your "
"configuration requires ${REQUIRED} partitions."
msgstr ""

#. Type: select
#. Choices
#: ../mdcfg-utils.templates:42
msgid "RAID0"
msgstr ""

#. Type: select
#. Choices
#: ../mdcfg-utils.templates:42
msgid "RAID1"
msgstr ""

#. Type: select
#. Choices
#: ../mdcfg-utils.templates:42
msgid "RAID5"
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:43
msgid "Multidisk device type:"
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:43
msgid "Please choose the type of the multidisk device to be created."
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:48
msgid "Number of active devices for the RAID1 array:"
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:48
msgid ""
"The RAID1 array will consist of both active and spare partitions. The active "
"partitions are those used, while the spare devices will only be used if one "
"or more of the active devices fail."
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:57
msgid "Number of spare devices for the RAID1 array:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:62
msgid "Spare devices for the RAID1 multidisk device:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:62
msgid "You have chosen to create an RAID1 array with ${COUNT} spare devices."
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:72
msgid "Number of active devices for the RAID5 array:"
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:72
msgid ""
"The RAID5 array will consist of both active and spare partitions. The active "
"partitions are those used, while the spare devices will only be used if one "
"or more of the active devices fail. A minimum of three active devices is "
"required."
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:72
msgid "NOTE: this setting cannot be changed later."
msgstr ""

#. Type: string
#. Description
#: ../mdcfg-utils.templates:82
msgid "Number of spare devices for the RAID5 array:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:87
msgid "Spare devices for the RAID5 multidisk device:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:87
msgid "You have chosen to create an RAID5 array with ${COUNT} spare devices."
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:87
msgid ""
"Please choose which partitions will be used as spare devices. You may choose "
"up to ${COUNT} partitions. If you choose less than ${COUNT} devices, the "
"remaining partitions will be added to the array as \"missing\". You will be "
"able to add them later to the array."
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:98
msgid "Active devices for the RAID0 multidisk device:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:98
msgid ""
"You have chosen to create a RAID0 array. Please choose the active devices in "
"this array."
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:105
msgid "Active devices for the RAID1 multidisk device:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:105
msgid "You have chosen to create an RAID1 array with ${COUNT} active devices."
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:114
msgid "Active devices for the RAID5 multidisk device:"
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:114
msgid "You have chosen to create an RAID5 array with ${COUNT} active devices."
msgstr ""

#. Type: multiselect
#. Description
#: ../mdcfg-utils.templates:114
msgid ""
"Please choose which partitions are active devices. You must select exactly "
"${COUNT} partitions."
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:124
msgid "Multidisk device to be deleted:"
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:124
msgid ""
"Deleting a multidisk device will stop it and clear the superblock of all its "
"components."
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:124
msgid ""
"Please note this will not immediately allow you to reuse the partitions or "
"devices in a new multidisk device. The array will however be unusable after "
"the deletion."
msgstr ""

#. Type: select
#. Description
#: ../mdcfg-utils.templates:124
msgid ""
"If you select a device for deletion, you will get some information about it "
"and you will be given the option of aborting this operation."
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:137
msgid "No multidisk devices available"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:137
msgid "No multidisk devices are available for deletion."
msgstr ""

#. Type: boolean
#. Description
#: ../mdcfg-utils.templates:144
msgid "Really delete this multidisk device?"
msgstr ""

#. Type: boolean
#. Description
#: ../mdcfg-utils.templates:144
msgid ""
"Please confirm whether you really want to delete the following multidisk "
"device:"
msgstr ""

#. Type: boolean
#. Description
#: ../mdcfg-utils.templates:144
msgid ""
" Device:            ${DEVICE}\n"
" Type:              ${TYPE}\n"
" Component devices:"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:156
msgid "Failed to delete the multidisk device"
msgstr ""

#. Type: error
#. Description
#: ../mdcfg-utils.templates:156
msgid "There was an error deleting the multidisk device. It may be in use."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. Main menu item
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: text
#. Description
#. Main menu item
#. Use infinitive form
#: ../lvmcfg.templates:1001 ../partman-lvm.templates:134
msgid "Configure the Logical Volume Manager"
msgstr ""

#. Type: boolean
#. Description
#: ../lvmcfg-utils.templates:1001 ../partman-lvm.templates:139
msgid "Activate existing volume groups?"
msgstr ""

#. Type: boolean
#. Description
#: ../lvmcfg-utils.templates:1001 ../partman-lvm.templates:139
msgid ""
"${COUNT} existing volume groups have been found. Please indicate whether you "
"want to activate them."
msgstr ""

#. Type: select
#. Choices
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001
msgid "Modify volume groups (VG)"
msgstr ""

#. Type: select
#. Choices
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001
msgid "Modify logical volumes (LV)"
msgstr ""

#. Type: select
#. Choices
#. LVM main menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. Type: select
#. Choices
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#. Type: select
#. Choices
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:2001 ../lvmcfg-utils.templates:3001
#: ../lvmcfg-utils.templates:4001
msgid "Leave"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:2002 ../partman-lvm.templates:146
msgid "LVM configuration action:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:2002
msgid "This is the Logical Volume Manager configuration menu."
msgstr ""

#. Type: select
#. Choices
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Create volume groups"
msgstr ""

#. Type: select
#. Choices
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Delete volume groups"
msgstr ""

#. Type: select
#. Choices
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Extend volume groups"
msgstr ""

#. Type: select
#. Choices
#. Volume groups configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:3001
msgid "Reduce volume groups"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:3002
msgid "Volume groups configuration action:"
msgstr ""

#. Type: select
#. Choices
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:4001
msgid "Create logical volumes"
msgstr ""

#. Type: select
#. Choices
#. Logical volumes configuration menu choices
#. Translators : please use infinitive form or the equivalent
#. in your language
#. Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../lvmcfg-utils.templates:4001
msgid "Delete logical volumes"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:4002
msgid "Logical volumes configuration action:"
msgstr ""

#. Type: multiselect
#. Description
#: ../lvmcfg-utils.templates:5001 ../partman-lvm.templates:163
msgid "Devices for the new volume group:"
msgstr ""

#. Type: multiselect
#. Description
#: ../lvmcfg-utils.templates:5001 ../partman-lvm.templates:163
msgid "Please select the devices for the new volume group."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: multiselect
#. Description
#: ../lvmcfg-utils.templates:5001 ../lvmcfg-utils.templates:17001
#: ../partman-lvm.templates:278
msgid "You can select one or more devices."
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:6001 ../partman-lvm.templates:170
msgid "Volume group name:"
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:6001 ../partman-lvm.templates:170
msgid "Please enter the name you would like to use for the new volume group."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../lvmcfg-utils.templates:7001 ../lvmcfg-utils.templates:18001
#: ../partman-lvm.templates:285
msgid "No physical volumes selected"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:7001 ../partman-lvm.templates:175
msgid ""
"No physical volumes were selected. The creation of a new volume group was "
"aborted."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:8001 ../partman-lvm.templates:181
msgid "No volume group name entered"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:8001 ../partman-lvm.templates:181
msgid "No name for the volume group has been entered.  Please enter a name."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:9001 ../partman-lvm.templates:187
#: ../partman-auto-lvm.templates:33
msgid "Volume group name already in use"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: string
#. Description
#: ../lvmcfg-utils.templates:9001 ../partman-lvm.templates:187
#: ../partman-auto-lvm.templates:12
msgid ""
"The selected volume group name is already in use. Please choose another name."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:10001 ../partman-lvm.templates:193
msgid "Volume group name overlaps with device name"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:10001 ../partman-lvm.templates:193
msgid ""
"The selected volume group name overlaps with an existing device name. Please "
"choose another name."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:11001 ../partman-lvm.templates:207
msgid "Volume group to delete:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:11001 ../partman-lvm.templates:207
msgid "Please select the volume group you wish to delete."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../lvmcfg-utils.templates:12001 ../lvmcfg-utils.templates:15001
#: ../lvmcfg-utils.templates:20001 ../lvmcfg-utils.templates:25001
#: ../lvmcfg-utils.templates:26001 ../lvmcfg-utils.templates:33001
#: ../partman-lvm.templates:299
msgid "No volume group found"
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../lvmcfg-utils.templates:12001 ../lvmcfg-utils.templates:15001
#: ../lvmcfg-utils.templates:20001 ../partman-lvm.templates:264
msgid "No volume group has been found."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:12001 ../partman-lvm.templates:212
msgid "The volume group may have already been deleted."
msgstr ""

#. Type: boolean
#. Description
#: ../lvmcfg-utils.templates:13001 ../partman-lvm.templates:220
msgid "Really delete the volume group?"
msgstr ""

#. Type: boolean
#. Description
#: ../lvmcfg-utils.templates:13001 ../partman-lvm.templates:220
msgid "Please confirm the ${VG} volume group removal."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:14001 ../partman-lvm.templates:225
msgid "Error while deleting volume group"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:14001 ../partman-lvm.templates:225
msgid ""
"The selected volume group could not be deleted. One or more logical volumes "
"may currently be in use."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:15001 ../partman-lvm.templates:231
msgid "No volume group can be deleted."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:16001 ../partman-lvm.templates:239
msgid "Volume group to extend:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:16001 ../partman-lvm.templates:239
msgid "Please select the volume group you wish to extend."
msgstr ""

#. Type: multiselect
#. Description
#: ../lvmcfg-utils.templates:17001 ../partman-lvm.templates:245
msgid "Devices to add to the volume group:"
msgstr ""

#. Type: multiselect
#. Description
#: ../lvmcfg-utils.templates:17001 ../partman-lvm.templates:245
msgid "Please select the devices you wish to add to the volume group."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:18001 ../partman-lvm.templates:252
msgid ""
"No physical volumes were selected. Extension of the volume group was aborted."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:19001 ../partman-lvm.templates:258
msgid "Error while extending volume group"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:19001 ../partman-lvm.templates:258
msgid ""
"The physical volume ${PARTITION} could not be added to the selected volume "
"group."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:20001 ../partman-lvm.templates:264
msgid "No volume group can be reduced."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:21001 ../partman-lvm.templates:272
msgid "Volume group to reduce:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:21001 ../partman-lvm.templates:272
msgid "Please select the volume group you wish to reduce."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:22001
msgid "Device to remove from volume group:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:22001
msgid "Please select the device you wish to remove from the volume group."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../lvmcfg-utils.templates:23001 ../lvmcfg-utils.templates:24001
#: ../partman-lvm.templates:291
msgid "Error while reducing volume group"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:23001
msgid ""
"The selected volume group (${VG}) could not be reduced. There is only one "
"physical volume attached. Please delete the volume group instead."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:24001 ../partman-lvm.templates:291
msgid ""
"The physical volume ${PARTITION} could not be removed from the selected "
"volume group."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:25001
msgid ""
"No volume groups were found for creating a new logical volume.  Please "
"create more physical volumes and volume groups."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:26001 ../partman-lvm.templates:299
msgid ""
"No free volume groups were found for creating a new logical volume. Please "
"create more physical volumes and volume groups, or reduce an existing volume "
"group."
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:27001 ../partman-lvm.templates:306
msgid "Logical volume name:"
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:27001 ../partman-lvm.templates:306
msgid "Please enter the name you would like to use for the new logical volume."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#. Type: select
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: select
#. Description
#: ../lvmcfg-utils.templates:28001 ../lvmcfg-utils.templates:34001
#: ../partman-lvm.templates:312
msgid "Volume group:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:28001 ../partman-lvm.templates:312
msgid ""
"Please select the volume group where the new logical volume should be "
"created."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:29001 ../partman-lvm.templates:318
msgid "No logical volume name entered"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:29001 ../partman-lvm.templates:318
msgid "No name for the logical volume has been entered.  Please enter a name."
msgstr ""

#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#. Type: error
#. Description
#. #-#-#-#-#  templates.pot (PACKAGE VERSION)  #-#-#-#-#
#. Type: error
#. Description
#: ../lvmcfg-utils.templates:30001 ../lvmcfg-utils.templates:32001
#: ../partman-lvm.templates:337
msgid "Error while creating a new logical volume"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:30001 ../partman-lvm.templates:324
msgid ""
"The name ${LV} is already in use by another logical volume on the same "
"volume group (${VG})."
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:31001 ../partman-lvm.templates:330
msgid "Logical volume size:"
msgstr ""

#. Type: string
#. Description
#: ../lvmcfg-utils.templates:31001 ../partman-lvm.templates:330
msgid ""
"Please enter the size of the new logical volume. The size may be entered in "
"the following formats: 10K (Kilobytes), 10M (Megabytes), 10G (Gigabytes), "
"10T (Terabytes). The default unit is Megabytes."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:32001 ../partman-lvm.templates:337
msgid ""
"Unable to create a new logical volume (${LV}) on ${VG} with the new size "
"${SIZE}."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:33001
msgid "No volume group has been found for deleting a logical volume."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:34001
msgid ""
"Please select the volume group which contains the logical volume to be "
"deleted."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:35001 ../partman-lvm.templates:345
msgid "No logical volume found"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:35001 ../partman-lvm.templates:345
msgid ""
"No logical volume has been found.  Please create a logical volume first."
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:36001 ../partman-lvm.templates:351
msgid "Logical volume:"
msgstr ""

#. Type: select
#. Description
#: ../lvmcfg-utils.templates:36001
msgid "Please select the logical volume to be deleted on ${VG}."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:37001 ../partman-lvm.templates:360
msgid "Error while deleting the logical volume"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:37001 ../partman-lvm.templates:360
msgid "The logical volume (${LV}) on ${VG} could not be deleted."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:38001 ../partman-lvm.templates:367
msgid "No usable physical volumes found"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:38001 ../partman-lvm.templates:367
msgid ""
"No physical volumes (i.e. partitions) were found in your system. All "
"physical volumes may already be in use. You may also need to load some "
"required kernel modules or re-partition the hard drives."
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:39001 ../partman-lvm.templates:374
msgid "Logical Volume Manager not available"
msgstr ""

#. Type: error
#. Description
#: ../lvmcfg-utils.templates:39001 ../partman-lvm.templates:374
msgid ""
"The current kernel doesn't support the Logical Volume Manager. You may need "
"to load the lvm-mod module."
msgstr ""

#. Type: text
#. Description
#: ../partman-md.templates:3
msgid "Software RAID device"
msgstr ""

#. Type: text
#. Description
#: ../partman-md.templates:7
msgid "Configure software RAID"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-md.templates:13
msgid "Write the changes to the storage devices and configure RAID?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-md.templates:13
msgid ""
"Before RAID can be configured, the changes have to be written to the storage "
"devices.  These changes cannot be undone."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-md.templates:28
msgid "Keep current partition layout and configure RAID?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-md.templates:28
msgid ""
"When RAID is configured, no additional changes to the partitions in the "
"disks containing physical volumes are allowed.  Please convince yourself "
"that you are satisfied with the current partitioning scheme in these disks."
msgstr ""

#. Type: error
#. Description
#: ../partman-md.templates:36
msgid "RAID configuration failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-md.templates:36
msgid "The configuration of RAID is aborted."
msgstr ""

#. Type: text
#. Description
#: ../partman-md.templates:43
msgid "physical volume for RAID"
msgstr ""

#. Type: text
#. Description
#: ../partman-md.templates:47
msgid "raid"
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:3
msgid "Unallocated physical volumes:"
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:7
msgid "Volume groups:"
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:11
msgid "Uses physical volume:"
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:15
msgid "Provides logical volume:"
msgstr ""

#. Type: text
#. Description
#. "none" here == "No Physical Volumes"
#: ../partman-lvm.templates:20
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Physical Volumes:\" ]"
msgstr ""

#. Type: text
#. Description
#. "none" here == "No Volume Groups"
#: ../partman-lvm.templates:25
msgid ""
"none[ Do not translate what's inside the brackets and just put the "
"translation for the word \"none\" in your language without any brackets. "
"This \"none\" relates to \"Volume Groups:\" ]"
msgstr ""

#. Type: text
#. Description
#. Translators: use the acronym for "Physical Volume" in your language here
#: ../partman-lvm.templates:34
msgid "PV"
msgstr ""

#. Type: text
#. Description
#. What is "in use" is a partition
#: ../partman-lvm.templates:39
msgid "In use by LVM volume group ${VG}"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:45
msgid "Display configuration details"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:51
msgid "Create volume group"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:57
msgid "Delete volume group"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:63
msgid "Extend volume group"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:69
msgid "Reduce volume group"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:75
msgid "Create logical volume"
msgstr ""

#. Type: text
#. Description
#. Menu entry
#. Use infinitive form
#: ../partman-lvm.templates:81
msgid "Delete logical volume"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-lvm.templates:93
msgid "Write the changes to disks and configure LVM?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-lvm.templates:93
msgid ""
"Before the Logical Volume Manager can be configured, the current "
"partitioning scheme has to be written to disk.  These changes cannot be "
"undone."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-lvm.templates:93
msgid ""
"After the Logical Volume Manager is configured, no additional changes to the "
"partitioning scheme of disks containing physical volumes are allowed during "
"the installation. Please decide if you are satisfied with the current "
"partitioning scheme before continuing."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-lvm.templates:108
msgid "Keep current partition layout and configure LVM?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-lvm.templates:108
msgid ""
"After the Logical Volume Manager is configured, no additional changes to the "
"partitions in the disks containing physical volumes are allowed. Please "
"decide if you are satisfied with the current partitioning scheme in these "
"disks before continuing."
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:116
msgid "LVM configuration failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:116
msgid "An error occurred while writing the changes to the disks."
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:116
msgid "The configuration of the Logical Volume Manager is aborted."
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:123
msgid "physical volume for LVM"
msgstr ""

#. Type: text
#. Description
#. keep it short (ideally a 3-letter acronym)
#: ../partman-lvm.templates:128
msgid "lvm"
msgstr ""

#. Type: select
#. Description
#: ../partman-lvm.templates:146
msgid "Summary of current LVM configuration:"
msgstr ""

#. Type: select
#. Description
#: ../partman-lvm.templates:146
msgid ""
" Free Physical Volumes:  ${FREE_PVS}\n"
" Used Physical Volumes:  ${USED_PVS}\n"
" Volume Groups:          ${VGS}\n"
" Logical Volumes:        ${LVS}"
msgstr ""

#. Type: note
#. Description
#: ../partman-lvm.templates:157
msgid "Current LVM configuration:"
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:199
msgid "The volume group ${VG} could not be created."
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-lvm.templates:278
msgid "Devices to remove from the volume group:"
msgstr ""

#. Type: multiselect
#. Description
#: ../partman-lvm.templates:278
msgid "Please select the devices you wish to remove from the volume group."
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:285
msgid ""
"No physical volumes were selected. Reduction of the volume group was aborted."
msgstr ""

#. Type: select
#. Description
#: ../partman-lvm.templates:351
msgid "Please select the logical volume to delete."
msgstr ""

#. Type: text
#. Description
#: ../partman-lvm.templates:356
msgid "in VG ${VG}"
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:380
msgid "Error while initializing physical volume"
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:380
msgid "The physical volume ${PV} could not be initialized."
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:387
msgid "Invalid logical volume or volume group name"
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:387
msgid ""
"Logical volume or volume group names may only contain alphanumeric "
"characters, hyphen, plus, period and underscore. They must be 128 characters "
"or less and may not begin with a hyphen. The names \".\" and \"..\" are not "
"allowed. In addition, logical volume names may not begin with \"snapshot\"."
msgstr ""

#. Type: error
#. Description
#: ../partman-lvm.templates:387
msgid "Please choose another name."
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto-lvm.templates:4
msgid "Guided - use entire disk and set up LVM"
msgstr ""

#. Type: string
#. Description
#: ../partman-auto-lvm.templates:12
msgid "Name of the volume group for the new system:"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-lvm.templates:18
msgid ""
"This happened because the selected recipe does not contain any partition "
"that can be created on LVM volumes."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto-lvm.templates:24
msgid "Continue installation without /boot partition?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto-lvm.templates:24
msgid ""
"The recipe you selected does not contain a separate partition for /boot. "
"This is normally needed to allow you to boot the system when using LVM."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-auto-lvm.templates:24
msgid ""
"You can choose to ignore this warning, but that may result in a failure to "
"reboot the system after the installation is completed."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-lvm.templates:33
msgid ""
"The volume group name used to automatically partition using LVM is already "
"in use. Lowering the priority for configuration questions will allow you to "
"specify an alternative name."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-lvm.templates:40
msgid "Unexpected error while creating volume group"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-lvm.templates:40
msgid ""
"Autopartitioning using LVM failed because an error occurred while creating "
"the volume group."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-raid.templates:3
msgid "Error while setting up RAID"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-raid.templates:3
msgid ""
"An unexpected error occurred while setting up a preseeded RAID configuration."
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-raid.templates:20
msgid "Not enough RAID partitions specified"
msgstr ""

#. Type: error
#. Description
#: ../partman-auto-raid.templates:20
msgid ""
"There are not enough RAID partitions specified for your preseeded "
"configuration. You need at least 3 devices for a RAID5 array."
msgstr ""

#. Type: text
#. Description
#. File system name
#. Keep translations short enough
#: ../partman-crypto.templates:5
msgid "physical volume for encryption"
msgstr ""

#. Type: text
#. Description
#. Short file system name (untranslatable in many languages)
#. Should be kept very short or unstranslated
#: ../partman-crypto.templates:11
msgid "crypto"
msgstr ""

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#. Translations should be kept below 40 columns
#: ../partman-crypto.templates:18
msgid "Loopback (loop-AES)"
msgstr ""

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#. Translations should be kept below 40 columns
#: ../partman-crypto.templates:25
msgid "Device-mapper (dm-crypt)"
msgstr ""

#. Type: text
#. Description
#. This is related to "encryption method"
#. Encryption type for a file system
#: ../partman-crypto.templates:35
msgid "not active"
msgstr ""

#. Type: text
#. Description
#. Should be kept below 24 columns
#: ../partman-crypto.templates:40
msgid "Encryption method:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:45
msgid "Encryption method for this partition:"
msgstr ""

#. Type: text
#. Description
#. Should be kept below 24 columns
#: ../partman-crypto.templates:50
msgid "Encryption:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:55
msgid "Encryption for this partition:"
msgstr ""

#. Type: text
#. Description
#. Should be kept below 24 columns
#: ../partman-crypto.templates:60
msgid "Key size:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:65
msgid "Key size for this partition:"
msgstr ""

#. Type: text
#. Description
#. An initialization vector is the initial value used to seed
#. the encryption algorithm
#. Should be kept below 24 columns
#: ../partman-crypto.templates:72
msgid "IV algorithm:"
msgstr ""

#. Type: select
#. Description
#. An initialization vector is the initial randomness used to seed
#. the encryption algorithm
#: ../partman-crypto.templates:79
msgid "Initialization vector generation algorithm for this partition:"
msgstr ""

#. Type: select
#. Description
#. An initialization vector is the initial randomness used to seed
#. the encryption algorithm
#: ../partman-crypto.templates:79
msgid ""
"Different algorithms exist to derive the initialization vector for each "
"sector. This choice influences the encryption security. Normally, there is "
"no reason to change this from the recommended default, except for "
"compatibility with older systems."
msgstr ""

#. Type: text
#. Description
#. Should be kept below 24 columns
#: ../partman-crypto.templates:88
msgid "Encryption key:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:93
msgid "Type of encryption key for this partition:"
msgstr ""

#. Type: text
#. Description
#. Should be kept below 24 columns
#: ../partman-crypto.templates:98
msgid "Encryption key hash:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:103
msgid "Type of encryption key hash for this partition:"
msgstr ""

#. Type: select
#. Description
#: ../partman-crypto.templates:103
msgid ""
"The encryption key is derived from the passphrase by applying a one-way hash "
"function to it. Normally, there is no reason to change this from the "
"recommended default and doing so in the wrong way can reduce the encryption "
"strength."
msgstr ""

#. Type: text
#. Description
#. This shows up in a screen summarizing options and will be followed
#. by "yes" or "no"
#: ../partman-crypto.templates:113
msgid "Erase data:"
msgstr ""

#. Type: text
#. Description
#: ../partman-crypto.templates:125
msgid "Erase data on this partition"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:130
msgid "Really erase the data on ${DEVICE}?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:130
msgid ""
"The data on ${DEVICE} will be overwritten with random data. It can no longer "
"be recovered after this step has completed. This is the last opportunity to "
"abort the erase."
msgstr ""

#. Type: text
#. Description
#: ../partman-crypto.templates:137
msgid "Erasing data on ${DEVICE}"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:141
msgid "Erasing data on ${DEVICE} failed"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:141
msgid ""
"An error occurred trying to erase the data on ${DEVICE}. The data has not "
"been erased."
msgstr ""

#. Type: text
#. Description
#: ../partman-crypto.templates:147
msgid "Setting up encryption..."
msgstr ""

#. Type: text
#. Description
#: ../partman-crypto.templates:151
msgid "Configure encrypted volumes"
msgstr ""

#. Type: note
#. Description
#: ../partman-crypto.templates:155
msgid "No partitions to encrypt"
msgstr ""

#. Type: note
#. Description
#: ../partman-crypto.templates:155
msgid "No partitions have been selected for encryption."
msgstr ""

#. Type: note
#. Description
#: ../partman-crypto.templates:160
msgid "Required programs missing"
msgstr ""

#. Type: note
#. Description
#: ../partman-crypto.templates:160
msgid ""
"This build of debian-installer does not include one or more programs that "
"are required for partman-crypto to function correctly."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:167
msgid "Required encryption options missing"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:167
msgid ""
"The encryption options for ${DEVICE} are incomplete. Please return to the "
"partition menu and select all required options."
msgstr ""

#. Type: text
#. Description
#. Translators: this string is used to assemble a string of the format
#. "$specify_option: $missing". If this proves to be a problem in your
#. language, please contact the maintainer and we can do it differently.
#: ../partman-crypto.templates:178
msgid "missing"
msgstr ""

#. Type: text
#. Description
#. What is "in use" is a partition
#: ../partman-crypto.templates:183
msgid "In use as physical volume for encrypted volume ${DEV}"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:187
msgid "Encryption package installation failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:187
msgid ""
"The kernel module package ${PACKAGE} could not be found or an error occurred "
"during its installation."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:187
msgid ""
"It is likely that there will be problems setting up encrypted partitions "
"when the system is rebooted. You may be able to correct this by installing "
"the required package(s) later on."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:199
msgid "Write the changes to disk and configure encrypted volumes?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:199
msgid ""
"Before encrypted volumes can be configured, the current partitioning scheme "
"has to be written to disk.  These changes cannot be undone."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:214
msgid "Keep current partition layout and configure encrypted volumes?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:214
msgid ""
"After the encrypted volumes have been configured, no additional changes to "
"the partitions on the disks containing encrypted volumes are allowed. Please "
"decide if you are satisfied with the current partitioning scheme for these "
"disks before continuing."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:222
msgid "Configuration of encrypted volumes failed"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:222
msgid "An error occurred while configuring encrypted volumes."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:222
msgid "The configuration has been aborted."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:229
msgid "Initialisation of encrypted volume failed"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:229
msgid "An error occurred while setting up encrypted volumes."
msgstr ""

#. Type: text
#. Description
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:238
msgid "Passphrase"
msgstr ""

#. Type: text
#. Description
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:246
msgid "Keyfile (GnuPG)"
msgstr ""

#. Type: text
#. Description
#. This is a key type for encrypted file systems
#. It can be either protected by a passphrase, a keyfile
#. of a random key
#. This text is one of these choices, so keep it short
#: ../partman-crypto.templates:254
msgid "Random key"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:258
msgid "Unsafe swap space detected"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:258
msgid "An unsafe swap space has been detected."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:258
msgid ""
"This is a fatal error since sensitive data could be written out to disk "
"unencrypted. This would allow someone with access to the disk to recover "
"parts of the encryption key or passphrase."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:258
msgid ""
"Please disable the swap space (e.g. by running swapoff) or configure an "
"encrypted swap space and then run setup of encrypted volumes again. This "
"program will now abort."
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:271
msgid "Encryption passphrase:"
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:271
msgid "You need to choose a passphrase to encrypt ${DEVICE}."
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:271
msgid ""
"The overall strength of the encryption depends strongly on this passphrase, "
"so you should take care to choose a passphrase that is not easy to guess. It "
"should not be a word or sentence found in dictionaries, or a phrase that "
"could be easily associated with you."
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:271
msgid ""
"A good passphrase will contain a mixture of letters, numbers and "
"punctuation. Passphrases are recommended to have a length of 20 or more "
"characters."
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:285
msgid "Re-enter passphrase to verify:"
msgstr ""

#. Type: password
#. Description
#: ../partman-crypto.templates:285
msgid ""
"Please enter the same passphrase again to verify that you have typed it "
"correctly."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:291
msgid "Passphrase input error"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:291
msgid "The two passphrases you entered were not the same. Please try again."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:296
msgid "Empty passphrase"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:296
msgid ""
"You entered an empty passphrase, which is not allowed. Please choose a non-"
"empty passphrase."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:307
msgid "Use weak passphrase?"
msgstr ""

#. Type: boolean
#. Description
#. Translators: we unfortunately cannot use plural forms here
#. So, you are suggested to use the plural form adapted for
#. MINIMUM=8, which is the current hardcoded value
#: ../partman-crypto.templates:307
msgid ""
"You entered a passphrase that consists of less than ${MINIMUM} characters, "
"which is considered too weak. You should choose a stronger passphrase."
msgstr ""

#. Type: entropy-text
#. Description
#: ../partman-crypto.templates:313
msgid "Enter random characters"
msgstr ""

#. Type: entropy-text
#. Description
#: ../partman-crypto.templates:313
msgid "The encryption key for ${DEVICE} is now being created."
msgstr ""

#. Type: entropy-text
#. Description
#: ../partman-crypto.templates:313
msgid ""
"You can help speed up the process by entering random characters on the "
"keyboard, or just wait until enough keydata has been collected. (NOTE: this "
"can take a long time)"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:322
msgid "Keyfile creation failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:322
msgid "An error occurred while creating the keyfile."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:327
msgid ""
"You have selected the root file system to be stored on an encrypted "
"partition. This feature is not available and continuing now would result in "
"an installation that cannot be used."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:327
msgid ""
"Please go back and choose a non-encrypted partition for the root file system."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:337
msgid ""
"You have selected the root file system to be stored on an encrypted "
"partition. This feature requires a separate /boot partition on which the "
"kernel and initrd can be stored."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:337
msgid "You should go back and setup a /boot partition."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:346
msgid "Encryption configuration failure"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:346
msgid ""
"You have selected the /boot file system to be stored on an encrypted "
"partition. This is not possible because the bootloader would be unable to "
"load the kernel and initrd. Continuing now would result in an installation "
"that cannot be used."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:346
msgid ""
"You should go back and choose a non-encrypted partition for the /boot file "
"system."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:358
msgid "Are you sure you want to use a random key?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:358
msgid ""
"You have chosen a random key type for ${DEVICE} but requested the "
"partitioner to create a file system on it."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:358
msgid ""
"Using a random key type means that the partition data is going to be "
"destroyed upon each reboot. This should only be used for swap partitions."
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:368
msgid "Failed to download crypto components"
msgstr ""

#. Type: error
#. Description
#: ../partman-crypto.templates:368
msgid "An error occurred trying to download additional crypto components."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:373
msgid "Proceed to install crypto components despite insufficient memory?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:373
msgid ""
"There does not seem to be sufficient memory available to install additional "
"crypto components. If you choose to go ahead and continue anyway, the "
"installation process could fail."
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:381
msgid "Really use block device encryption?"
msgstr ""

#. Type: boolean
#. Description
#: ../partman-crypto.templates:381
msgid ""
"The support for block device encryption is still experimental and not "
"considered ready for production. In particular it may result in setups that "
"are easy to break and so give a false sense of security. There are no known "
"encryption flaws, however, until the implementation is thoroughly audited, "
"this feature should not be used except for testing purposes."
msgstr ""

#. Type: text
#. Description
#. TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
#: ../partman-auto-crypto.templates:4
msgid "Guided - use entire disk and set up encrypted LVM"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:3
msgid "No partitions found"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:3
msgid ""
"No partitions were found in your system. You may need to partition your hard "
"drives or load additional kernel modules."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:9
msgid "No file systems found"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:9
msgid ""
"No usable file systems were found. You may need to load additional kernel "
"modules."
msgstr ""

#. Type: select
#. Choices
#: ../partconf.templates:16
msgid "Abort"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:17
msgid "Select a partition"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:17
msgid ""
"These are the partitions that were detected in your system. Please select a "
"partition to configure. No actual changes will be made until you select "
"\"Finish\". If you select \"Abort\", no changes will be made."
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:17
msgid ""
"The information shown is, in order: device name, size, file system, and "
"mount point."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:31
msgid "Leave the file system intact"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:33
msgid ""
"This partition seems to already have a file system (${FSTYPE}). You can "
"choose to leave this file system intact, create a new file system, or create "
"swap space."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#: ../partconf.templates:45
msgid "Create swap space"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:47
msgid "Action on ${PARTITION}:"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:47
msgid ""
"This partition does not seem to have a file system. You can create a file "
"system or swap space on it."
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of each choice
#. (separated by commas)
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages)
#. "it" is a partition
#: ../partconf.templates:62
msgid "Don't mount it"
msgstr ""

#. Type: select
#. Description
#: ../partconf.templates:63
msgid ""
"When a partition is mounted, it is available to the users of the system. You "
"always need a root (\"/\") partition, and it's often good to have a separate "
"partition for /home."
msgstr ""

#. Type: string
#. Description
#: ../partconf.templates:70
msgid "Mount point for ${PARTITION}:"
msgstr ""

#. Type: string
#. Description
#: ../partconf.templates:70
msgid "Please enter where the partition should be mounted."
msgstr ""

#. Type: boolean
#. Description
#: ../partconf.templates:76
msgid "Do you want to unmount the partitions so you can make changes?"
msgstr ""

#. Type: boolean
#. Description
#: ../partconf.templates:76
msgid ""
"Since the partitions have already been mounted, you cannot do any changes."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:82
msgid "Failed to unmount partitions"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:82
msgid ""
"An error occurred while unmounting the partitions. The partition "
"configuration process is aborted."
msgstr ""

#. Type: text
#. Description
#: ../partconf.templates:88
#, no-c-format
msgid "Create %s file system"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:92
msgid "No root partition (/)"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:92
msgid ""
"You need a root partition. Please assign a partition to the root mount point "
"before continuing."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:98
msgid "Partition assigned to ${MOUNT}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:98
msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:103
msgid "Several partitions assigned to ${MOUNT}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:103
msgid ""
"You cannot assign several partitions to the same mount point. Please change "
"all but one of them."
msgstr ""

#. Type: boolean
#. Description
#: ../partconf.templates:110
msgid "Ready to create file systems and mount partitions?"
msgstr ""

#. Type: boolean
#. Description
#: ../partconf.templates:110
msgid "File systems will be created and partitions mounted."
msgstr ""

#. Type: boolean
#. Description
#: ../partconf.templates:110
msgid ""
"WARNING: This will destroy all data on the partitions you have assigned file "
"systems to."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:118
msgid "Failed to create swap space on ${PARTITION}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:118
msgid "An error occurred when the swap space was created on ${PARTITION}."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:126
msgid "Failed to activate the swap space on ${PARTITION}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:126
msgid "An error occurred when the swap space on ${PARTITION} was activated."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:134
msgid "Failed to create ${FS} file system on ${PARTITION}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:134
msgid ""
"An error occurred when the ${FS} file system was created on ${PARTITION}."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:142
msgid "Failed to mount ${PARTITION} on ${MOUNT}"
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:142
msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}."
msgstr ""

#. Type: error
#. Description
#: ../partconf.templates:142
msgid ""
"Please check the error log on the third console or /var/log/messages for "
"more information."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../partconf.templates:151
msgid "Configure and mount partitions"
msgstr ""

#. Type: select
#. Description
#: ../partitioner.templates:5
msgid "Disk to partition:"
msgstr ""

#. Type: select
#. Description
#: ../partitioner.templates:5
msgid "Please choose one of the listed disks to create partitions on it."
msgstr ""

#. Type: select
#. Description
#: ../partitioner.templates:5 ../s390-dasd.templates:1002
msgid "Select \"Finish\" at the bottom of the list when you are done."
msgstr ""

#. Type: error
#. Description
#: ../partitioner.templates:12
msgid "No disk found"
msgstr ""

#. Type: error
#. Description
#: ../partitioner.templates:12
msgid ""
"Unable to find any disk in your system. Maybe some kernel modules need to be "
"loaded."
msgstr ""

#. Type: error
#. Description
#: ../partitioner.templates:18
msgid "Partitioning error"
msgstr ""

#. Type: error
#. Description
#: ../partitioner.templates:18
msgid "Failed to partition the disk ${DISC}."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../partitioner.templates:24
msgid "Partition a hard drive"
msgstr ""

#. Type: select
#. Description
#: ../autopartkit.templates:11
msgid ""
"Please choose the disk which has the free space required (column Free) to "
"install Debian GNU/Linux. If there's not enough free space, space can be "
"liberated by resizing the FAT partitions (column FreeFat indicates how much "
"space will be freed by resizing the existing FAT partitions)."
msgstr ""

#. Type: select
#. Description
#. This should be hard-formatted THE SAME WAY in translations and
#. original English
#. Example for French:
#. msgid  " Device   Model               Size   Free   FreeFAT NbPart"
#. msgstr " Periph.  Modele              Taille Libre  Fat-lib N Part"
#: ../autopartkit.templates:11
msgid " Device   Model               Size   Free   FreeFAT NbPart"
msgstr ""

#. Type: string
#. Description
#: ../autopartkit.templates:24
msgid "Device to partition:"
msgstr ""

#. Type: string
#. Description
#: ../autopartkit.templates:24
msgid ""
"No disk was automatically detected.  Please enter the path to the device "
"file for the disk you want to partition."
msgstr ""

#. Type: boolean
#. Description
#: ../autopartkit.templates:31
msgid "Really use the automatic partitioning tool?"
msgstr ""

#. Type: boolean
#. Description
#: ../autopartkit.templates:31
msgid ""
"This will destroy the partition table on all disks in the machine. REPEAT: "
"THIS WILL WIPE CLEAN ALL HARD DISKS IN THE MACHINE! If you have important "
"data that are not backed up, you may want to stop now in order to do a "
"backup. In that case, you'll have to restart the installation later."
msgstr ""

#. Type: error
#. Description
#: ../autopartkit.templates:41
msgid "An error occurred during the previous operation"
msgstr ""

#. Type: error
#. Description
#: ../autopartkit.templates:41
msgid "You may be able to continue. Here is some more information:"
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:48
msgid "Automatic partitioning impossible"
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:48
msgid ""
"This version of the autopartitioner cannot handle the partitioning of the "
"selected disk. It may partition only an empty disk or a disk with no more "
"than 2 FAT partitions (and no extended partitions or other non-FAT "
"partitions)."
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:48
msgid ""
"If you want to continue the installation process, switch to the second "
"console (ALT+F2), partition the disk as you like using parted and the other "
"available tools, and then mount all your partitions in /target. /target is "
"the root directory of your new system, so your root partition will be "
"mounted on /target and your /usr partition must be mounted on /target/usr."
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:48
msgid ""
"You can also consider launching this program again but selecting another "
"disk."
msgstr ""

#. Type: error
#. Description
#: ../autopartkit.templates:66
msgid "Not enough space on disk"
msgstr ""

#. Type: error
#. Description
#: ../autopartkit.templates:66
msgid ""
"The autopartitioner makes some assumptions about partition sizes, and "
"because of that it requires at least 3GB of free space. The free space on "
"this disk appears to be below this limit."
msgstr ""

#. Type: error
#. Description
#: ../autopartkit.templates:66
msgid ""
"If you really want to install, you'll have to free some space. You may also "
"launch this program again and select another disk with more free space."
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:78
msgid "Debug information about ${variable}"
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:78
msgid "Here is some debug information. The value of ${variable} is:"
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:85
msgid "Successful partitioning"
msgstr ""

#. Type: note
#. Description
#: ../autopartkit.templates:85
msgid ""
"The required partitions have been created and mounted on /target. You can "
"now continue the installation process."
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:92
msgid "File containing the requested partition table:"
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:92
msgid ""
"The automatic partitioning will be created using the partitions and sizes "
"specified in this file."
msgstr ""

#. Type: text
#. Description
#. Item in the main menu to select this package
#: ../autopartkit.templates:99
msgid "Automatically partition hard drives"
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:103
msgid "Creating '${FSTYPE}' storage space on '${MOUNTPOINT}'"
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:107
msgid "Estimated time left: ${HOURS} hour(s) ${MINUTES} minute(s)"
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:111
msgid "Estimated time left: ${MINUTES} minute(s)"
msgstr ""

#. Type: text
#. Description
#: ../autopartkit.templates:115
msgid "Estimated time left: less than 1 minute"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../s390-netdevice.templates:6
msgid "ctc: Channel to Channel (CTC) or ESCON connection"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../s390-netdevice.templates:6
msgid "qeth: OSA-Express in QDIO mode / HiperSockets"
msgstr ""

#. Type: select
#. Choices
#. Note to translators : Please keep your translations of the choices
#. below a 65 columns limit (which means 65 characters
#. in single-byte languages) including the initial path
#: ../s390-netdevice.templates:6
msgid "iucv: Inter-User Communication Vehicle - available for VM guests only"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:7
msgid "Network device type:"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:7
msgid ""
"Please choose the type of your primary network interface that you will need "
"for installing the Debian system (via NFS or HTTP). Only the listed devices "
"are supported."
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:15
msgid "CTC read device:"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:21
msgid "CTC write device:"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:21
msgid "The following device numbers might belong to CTC or ESCON connections."
msgstr ""

#. Type: boolean
#. Description
#: ../s390-netdevice.templates:27
msgid ""
"The configured parameters are:\n"
" read channel  = ${device_read}\n"
" write channel = ${device_write}\n"
" protocol      = ${protocol}"
msgstr ""

#. Type: error
#. Description
#: ../s390-netdevice.templates:35
msgid "No CTC or ESCON connections"
msgstr ""

#. Type: error
#. Description
#: ../s390-netdevice.templates:35
msgid "Please make sure that you have set them up correctly."
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:42
msgid "Protocol for this connection:"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:47
msgid "Device:"
msgstr ""

#. Type: select
#. Description
#: ../s390-netdevice.templates:47
msgid "Please select the OSA-Express QDIO / HiperSockets device."
msgstr ""

#. Type: boolean
#. Description
#: ../s390-netdevice.templates:53
msgid ""
"The configured parameters are:\n"
" channels = ${device0}, ${device1}, ${device2}\n"
" port     = ${port}\n"
" portname = ${portname}"
msgstr ""

#. Type: error
#. Description
#: ../s390-netdevice.templates:61
msgid "No OSA-Express QDIO cards / HiperSockets"
msgstr ""

#. Type: error
#. Description
#: ../s390-netdevice.templates:61
msgid ""
"No OSA-Express QDIO cards / HiperSockets were detected. If you are running "
"VM please make sure that your card is attached to this guest."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:67
msgid "Portname:"
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:67
msgid ""
"Please enter the portname of your OSA-Express card. This name must be 1 to 8 "
"characters long and must be equal on all systems accessing the same card."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:67
msgid ""
"Leave it empty if you want to use HiperSockets. This parameter is required "
"for cards with microcode level 2.10 or later or when you want to share a "
"card."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:67
msgid "The name will automatically be converted to uppercase."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:81
msgid "Port:"
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:81
msgid "Please enter a relative port for this connection."
msgstr ""

#. Type: boolean
#. Description
#: ../s390-netdevice.templates:87
msgid "Do you accept this configuration?"
msgstr ""

#. Type: boolean
#. Description
#: ../s390-netdevice.templates:87
msgid ""
"The configured parameter is:\n"
" peer  = ${peer}"
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:93
msgid "VM peer:"
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:93
msgid "Please enter the name of the VM peer you want to connect to."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:93
msgid ""
"If you want to connect to multiple peers, separate the names by colons, e."
"g.  tcpip:linux1."
msgstr ""

#. Type: string
#. Description
#: ../s390-netdevice.templates:93
msgid ""
"The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: "
"IUCV must be enabled in the VM user directory for this driver to work and it "
"must be set up on both ends of the communication."
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../s390-netdevice.templates:107
msgid "Configure the network device"
msgstr ""

#. Type: select
#. Description
#: ../s390-dasd.templates:1002
msgid "Available disks:"
msgstr ""

#. Type: select
#. Description
#: ../s390-dasd.templates:1002
msgid ""
"The following disk access storage devices (DASD) are available. Please "
"select each device you want to use one at a time."
msgstr ""

#. Type: string
#. Description
#: ../s390-dasd.templates:2001
msgid "Choose disk:"
msgstr ""

#. Type: string
#. Description
#: ../s390-dasd.templates:2001
msgid ""
"Please choose a disk. You have to specify the complete device number, "
"including leading zeros."
msgstr ""

#. Type: error
#. Description
#: ../s390-dasd.templates:3001
msgid "Invalid disk"
msgstr ""

#. Type: error
#. Description
#: ../s390-dasd.templates:3001
msgid "An invalid device number has been chosen."
msgstr ""

#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../s390-dasd.templates:4001 ../s390-dasd.templates:6001
msgid "Format the disk?"
msgstr ""

#. Type: boolean
#. Description
#: ../s390-dasd.templates:4001
msgid ""
"The device ${device} seems to be a fresh disk not yet prepared for Linux. "
"Such disk should be formatted before you can create partitions."
msgstr ""

#. Type: text
#. Description
#: ../s390-dasd.templates:5001
msgid "Formatting ${device}..."
msgstr ""

#. Type: boolean
#. Description
#: ../s390-dasd.templates:6001
msgid ""
"The device ${device} seems to be an already low-level formatted disk. If the "
"disk has not been used for Linux 2.4 before, formatting it now is "
"recommended."
msgstr ""

#. Type: boolean
#. Description
#: ../s390-dasd.templates:6001
msgid "WARNING: All data on this disk will be IRREVERSIBLY LOST!"
msgstr ""

#. Type: text
#. Description
#. Main menu item. Keep translations below 55 columns
#: ../s390-dasd.templates:7001
msgid "Configure disk access storage devices (DASD)"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#: ../zipl-installer.templates:4
msgid "Install the ZIPL boot loader on a hard disk"
msgstr ""

#. Type: text
#. Description
#. The GLAN Tank is a Network Attached Storage (NAS) device
#. based on an Intel IOP CPU.
#. TRANSLATORS: it is suggested that you DO NO translate
#. "GLAN Tank"
#. Main menu item
#: ../glantank-installer.templates:8
msgid "Make GLAN Tank bootable"
msgstr ""

#. Type: text
#. Description
#. This item is a progress bar item when the system configures
#. some flashable memory used by many embedded devices
#: ../flash-kernel-installer.templates:5
msgid "Configuring flash memory to boot the system"
msgstr ""

#. Type: text
#. Description
#. This is "preparing the system" to flash the kernel and initrd
#. on a flashable memory
#: ../flash-kernel-installer.templates:11
msgid "Preparing the system"
msgstr ""

#. Type: text
#. Description
#. This is a progress bar showing up when the system
#. write the kernel to the flashable memory of the embedded device
#: ../flash-kernel-installer.templates:17
msgid "Writing the kernel to flash memory"
msgstr ""

#. Type: text
#. Description
#. Main menu item
#. This item is a menu entry for a step where the system configures
#. the flashable memory used by many embedded devices
#. (writing the kernel and initrd to it)
#: ../flash-kernel-installer.templates:25
msgid "Configure flash memory to boot the system"
msgstr ""