Difference between revisions of "WirelessMesh"

370 bytes removed ,  21:41, 11 April 2007
Line 120: Line 120:
==WAN Setup for Internet==
==WAN Setup for Internet==


For internet access, simply connect your internet ethernet cable to the WAN port of any Node that you want to use as the mesh gateway. Depending on your internet connection, choose Static or DHCP for your WAN IP address. The OLSR protocol in the mesh ensures that all the WLANs and LANs can connect to the internet.
For internet access, simply connect your internet ethernet cable to the WAN port of any Node that you want to use as the mesh gateway. Depending on your internet connection, choose Static or DHCP for your WAN IP address. The OLSR protocol in the mesh ensures that all the WLANs and LANs can connect to the internet.
 
==Checking The Mesh==
 
In order to know if your mesh is up and running properly, log into every Node's interface and check the 'Status' as well as 'OLSR' output of the interface. The most delightfull part of the mesh is to see other Nodes as 'Neighbours' in your status reports. If your mesh is running pproperly you can access all your Nodes through any single Node.
Anonymous user